Hello Sir
Thanks for the answer. I am sorry for delay in response.
I opened the file console.out, but did not find any thing written in it.
Simics does not open a console window too. What then could be the source of
error?
Thanks
Sparsh
On Thu, Jul 2, 2009 at 11:06 AM, Stephen Somogyi <ssomogyi at ece.cmu.edu>wrote:
> Sorry for the delayed response - most of us were away at a conference when
> you submitted this message to the mailing list.
>
> Something went awry in the flexpoint creation process - it is supposed to
> generate 11 flexpoints, each spaced 4M instructions apart. Instead, you
> have been running for over 32B instructions.
>
> It is likely that the test application is not actually running on the
> simulated machine. Can you grab output of the simuated machine (i.e., the
> console window of simics) and send that to us? If simics did not pop up a
> console window, the output will be in the 'console.out' file.
>
> Stephen
>
>
> On Tue, 23 Jun 2009, sparsh mittal ISU wrote:
>
> > Hello
> > I ran simulation for sparc architecture and ./prepare-test-app ran fine,
> but
> > when I run
> > ./create-initial-flexpoint TraceFlex
> > it does not last for at least three hours (I tried multiple times).
> > Here is the last part of the output:
> >
> > 39383 <flexus.cpp:270> {32791000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39384 <flexus.cpp:270> {32792000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39385 <flexus.cpp:270> {32793000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39386 <flexus.cpp:270> {32794000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39387 <flexus.cpp:270> {32795000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39388 <flexus.cpp:270> {32796000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39389 <flexus.cpp:270> {32797000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39390 <flexus.cpp:270> {32798000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39391 <flexus.cpp:270> {32799000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39392 <flexus.cpp:270> {32800000000}- Timestamp: 2009-Jun-23 10:39:37
> > 39393 <flexus.cpp:281> {32800000000}- Saving stats at: 32800000000
> > 39394 <flexus.cpp:300> {32800000000}- Writing profile at: 32800000000
> > 39395 <flexus.cpp:270> {32801000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39396 <flexus.cpp:270> {32802000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39397 <flexus.cpp:270> {32803000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39398 <flexus.cpp:270> {32804000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39399 <flexus.cpp:270> {32805000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39400 <flexus.cpp:270> {32806000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39401 <flexus.cpp:270> {32807000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39402 <flexus.cpp:270> {32808000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39403 <flexus.cpp:270> {32809000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39404 <flexus.cpp:270> {32810000000}- Timestamp: 2009-Jun-23 10:39:39
> > 39405 <flexus.cpp:281> {32810000000}- Saving stats at: 32810000000
> > 39406 <flexus.cpp:300> {32810000000}- Writing profile at: 32810000000
> > 39407 <flexus.cpp:270> {32811000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39408 <flexus.cpp:270> {32812000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39409 <flexus.cpp:270> {32813000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39410 <flexus.cpp:270> {32814000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39411 <flexus.cpp:270> {32815000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39412 <flexus.cpp:270> {32816000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39413 <flexus.cpp:270> {32817000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39414 <flexus.cpp:270> {32818000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39415 <flexus.cpp:270> {32819000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39416 <flexus.cpp:270> {32820000000}- Timestamp: 2009-Jun-23 10:39:41
> > 39417 <flexus.cpp:281> {32820000000}- Saving stats at: 32820000000
> > 39418 <flexus.cpp:300> {32820000000}- Writing profile at: 32820000000
> > [start.simics:10] script interrupted by user; some commands may not have
> > completed properly
> > [cpu0] v:0x0000000010155f24 p:0x00002d55f24 Pending trap (0x4e)
> > Interrupt_Level_14
> > simics> q
> > ./run-job: line 259: cd: flex_state_out: No such file or directory
> > all.measurement.out
> > configuration.out
> > configuration.simics
> > console.out
> > debug.cfg
> > debug.out
> > go.sh
> > go.tmp
> > iteration.trace.cfg
> > load-flexpoint.simics
> > load.simics
> > postload.simics
> > preload.simics
> > profile.out
> > save.simics
> > start.noflexus.simics
> > start.simics
> > stats_db.out.gz
> > stats.out
> > termination.dbg.cfg
> > termination.out
> > trace-debug.cfg
> > mv: cannot stat
> >
> `/home/sparsh/Download/flexus-3.0.0/flexus-test-app/checkpoints/flexpoints/flexpoint_000/simics_state':
> > No such file or directory
> > cat:
> >
> /home/sparsh/Download/flexus-3.0.0/flexus-test-app/checkpoints/flexpoints/flexpoint_000/simics_state.orig:
> > No such file or directory
> >
> > Kindly let me know, what action I should take. Do I need to provide more
> > information?
> > --
> > Thanks and Regards
> > Sparsh Mittal
> > Graduate Student
> > Electrical and Computer Engineering
> > Iowa State University, Iowa, USA
> >
> _______________________________________________
> SimFlex mailing list
> SimFlex at ece.cmu.edu
> https://sos.ece.cmu.edu/mailman/listinfo/simflex
> SimFlex web page:
> http://www.ece.cmu.edu/~simflex<http://www.ece.cmu.edu/%7Esimflex>
>
--
Thanks and Regards
Sparsh Mittal
Graduate Student
Electrical and Computer Engineering
Iowa State University, Iowa, USA
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://sos.ece.cmu.edu/pipermail/simflex/attachments/20090715/ce123b66/attachment.html>
