Sorry for the delayed response - most of us were away at a conference when
you submitted this message to the mailing list.
Something went awry in the flexpoint creation process - it is supposed to
generate 11 flexpoints, each spaced 4M instructions apart. Instead, you
have been running for over 32B instructions.
It is likely that the test application is not actually running on the
simulated machine. Can you grab output of the simuated machine (i.e., the
console window of simics) and send that to us? If simics did not pop up a
console window, the output will be in the 'console.out' file.
Stephen
On Tue, 23 Jun 2009, sparsh mittal ISU wrote:
> Hello
> I ran simulation for sparc architecture and ./prepare-test-app ran fine, but
> when I run
> ./create-initial-flexpoint TraceFlex
> it does not last for at least three hours (I tried multiple times).
> Here is the last part of the output:
>
> 39383 <flexus.cpp:270> {32791000000}- Timestamp: 2009-Jun-23 10:39:37
> 39384 <flexus.cpp:270> {32792000000}- Timestamp: 2009-Jun-23 10:39:37
> 39385 <flexus.cpp:270> {32793000000}- Timestamp: 2009-Jun-23 10:39:37
> 39386 <flexus.cpp:270> {32794000000}- Timestamp: 2009-Jun-23 10:39:37
> 39387 <flexus.cpp:270> {32795000000}- Timestamp: 2009-Jun-23 10:39:37
> 39388 <flexus.cpp:270> {32796000000}- Timestamp: 2009-Jun-23 10:39:37
> 39389 <flexus.cpp:270> {32797000000}- Timestamp: 2009-Jun-23 10:39:37
> 39390 <flexus.cpp:270> {32798000000}- Timestamp: 2009-Jun-23 10:39:37
> 39391 <flexus.cpp:270> {32799000000}- Timestamp: 2009-Jun-23 10:39:37
> 39392 <flexus.cpp:270> {32800000000}- Timestamp: 2009-Jun-23 10:39:37
> 39393 <flexus.cpp:281> {32800000000}- Saving stats at: 32800000000
> 39394 <flexus.cpp:300> {32800000000}- Writing profile at: 32800000000
> 39395 <flexus.cpp:270> {32801000000}- Timestamp: 2009-Jun-23 10:39:39
> 39396 <flexus.cpp:270> {32802000000}- Timestamp: 2009-Jun-23 10:39:39
> 39397 <flexus.cpp:270> {32803000000}- Timestamp: 2009-Jun-23 10:39:39
> 39398 <flexus.cpp:270> {32804000000}- Timestamp: 2009-Jun-23 10:39:39
> 39399 <flexus.cpp:270> {32805000000}- Timestamp: 2009-Jun-23 10:39:39
> 39400 <flexus.cpp:270> {32806000000}- Timestamp: 2009-Jun-23 10:39:39
> 39401 <flexus.cpp:270> {32807000000}- Timestamp: 2009-Jun-23 10:39:39
> 39402 <flexus.cpp:270> {32808000000}- Timestamp: 2009-Jun-23 10:39:39
> 39403 <flexus.cpp:270> {32809000000}- Timestamp: 2009-Jun-23 10:39:39
> 39404 <flexus.cpp:270> {32810000000}- Timestamp: 2009-Jun-23 10:39:39
> 39405 <flexus.cpp:281> {32810000000}- Saving stats at: 32810000000
> 39406 <flexus.cpp:300> {32810000000}- Writing profile at: 32810000000
> 39407 <flexus.cpp:270> {32811000000}- Timestamp: 2009-Jun-23 10:39:41
> 39408 <flexus.cpp:270> {32812000000}- Timestamp: 2009-Jun-23 10:39:41
> 39409 <flexus.cpp:270> {32813000000}- Timestamp: 2009-Jun-23 10:39:41
> 39410 <flexus.cpp:270> {32814000000}- Timestamp: 2009-Jun-23 10:39:41
> 39411 <flexus.cpp:270> {32815000000}- Timestamp: 2009-Jun-23 10:39:41
> 39412 <flexus.cpp:270> {32816000000}- Timestamp: 2009-Jun-23 10:39:41
> 39413 <flexus.cpp:270> {32817000000}- Timestamp: 2009-Jun-23 10:39:41
> 39414 <flexus.cpp:270> {32818000000}- Timestamp: 2009-Jun-23 10:39:41
> 39415 <flexus.cpp:270> {32819000000}- Timestamp: 2009-Jun-23 10:39:41
> 39416 <flexus.cpp:270> {32820000000}- Timestamp: 2009-Jun-23 10:39:41
> 39417 <flexus.cpp:281> {32820000000}- Saving stats at: 32820000000
> 39418 <flexus.cpp:300> {32820000000}- Writing profile at: 32820000000
> [start.simics:10] script interrupted by user; some commands may not have
> completed properly
> [cpu0] v:0x0000000010155f24 p:0x00002d55f24 Pending trap (0x4e)
> Interrupt_Level_14
> simics> q
> ./run-job: line 259: cd: flex_state_out: No such file or directory
> all.measurement.out
> configuration.out
> configuration.simics
> console.out
> debug.cfg
> debug.out
> go.sh
> go.tmp
> iteration.trace.cfg
> load-flexpoint.simics
> load.simics
> postload.simics
> preload.simics
> profile.out
> save.simics
> start.noflexus.simics
> start.simics
> stats_db.out.gz
> stats.out
> termination.dbg.cfg
> termination.out
> trace-debug.cfg
> mv: cannot stat
> `/home/sparsh/Download/flexus-3.0.0/flexus-test-app/checkpoints/flexpoints/flexpoint_000/simics_state':
> No such file or directory
> cat:
> /home/sparsh/Download/flexus-3.0.0/flexus-test-app/checkpoints/flexpoints/flexpoint_000/simics_state.orig:
> No such file or directory
>
> Kindly let me know, what action I should take. Do I need to provide more
> information?
> --
> Thanks and Regards
> Sparsh Mittal
> Graduate Student
> Electrical and Computer Engineering
> Iowa State University, Iowa, USA
>
