On Wed, 31 Aug 2016, Johnny Billquist wrote:
Hi.
On 2016-08-31 17:40, Cory Smelosky wrote:
Cory, could you post the output from showing the device in simh?
I wonder if there might be some confusion about how to turn off lock
mode. I've never even tried modifying that. By default, I would assume
it would be correctly configured, meaning it should work right if you
don't try to "fix it".
I am doing SET DEQNALOCK to OFF, and SHOW XQ (in my initial posting
shows that IIRC) with it in DELQA mode, and later on after probing and
initialising it, despite DEQNALOCK set to OFF and showing as OFF, SHOW
XQ shows it has reverted to being in DEQNA mode.
No. You initial posting showed the dmesg output, but not the simh input or
output, unless I'm very confused.
Johnny
set xq en
set xq deqnalock=off
set xq type=delqa
at xq vde:/tmp/vde
(BOOT/R5:0 DUA0
Simulation stopped, PC: 2004CBD9 (CMPW (R5)+,28(SP))
sim> show xq
XQ address=20001920-2000192F, no vector, MAC=08:00:2B:6D:9C:95
type=DELQA, polling=disabled, sanity=OFF
throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
attached to vde:/tmp/vde
sim> c
[...]
qe0: DEC DELQA Ethernet Interface DEQNA-lock Mode, hardware address
08:00:2b:6d:9c:95
dz0 at uba0 csr 160100 vec 300, ipl 17
dz1 at uba0 csr 160110 vec 310, ipl 17
dz2 at uba0 csr 160120 vec 320, ipl 17
dz3 at uba0 csr 160130 vec 330, ipl 17
Simulation stopped, PC: 80003551 (BEQL 800034F0)
sim> show xq
XQ address=20001920-2000192F, vector=3F4*, MAC=08:00:2B:6D:9C:95
type=DELQA, mode=DEQNA, polling=disabled, sanity=OFF
throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
attached to vde:/tmp/vde
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
