Mark I'm using the pre-built V3.9-0 executables with networking support built by your kind self, downloaded from github.
The AlphaVM box has MOP characteristics defined as shown. The box has a separate drive pointed to by logical ALPEPHSYSTEM$ that contains an ODS-2 OpenVMS VAX 7.3 installation. This boots OK using a real VAXstation 4000/VLC. Same results regardless of idle flag. Host system is Windows Server 2012 R2. Network configuration is as follows: the box has two inbuilt ethernet ports and a 4 gigabit port card. The AlphaVM instance and SIMH instance are attached to different ethernet ports. All ports are connected to a 24 port HP Gbit switch. Thanks for the help, Mark. On 8 March 2015 at 23:44, Mark Pizzolato - Info Comm <[email protected]> wrote: > Hi Mark, > > > > That another system actually can boot from the AlphaVM system is good info. > > > > Meanwhile several questions come up: > > > > 1) What version of simh are you running on that SIMH instance? > > 2) How did you configure the SIMH instance to boot from the AlphaVM > system (what was done on the AlphaVM box)? > > 3) Do you get the same results with SET CPU IDLE vs SET CPU NOIDLE > in effect? > > 4) What host system are you running on? > > 5) What is your network configuration/topology? > > > > - Mark > > > > *From:* Simh [mailto:[email protected]] *On Behalf Of *Mark > Wickens > *Sent:* Sunday, March 08, 2015 4:38 PM > *To:* [email protected] > *Subject:* [Simh] Issue with MOP booting SIMH instance from AlphaVM > > > > Sorry, I should add that the actual VAXstation 4000/VLC box that the SIMH > instance is emulating does MOP boot sucessfully off the AlphaVM instance. > > > > Regards, Mark >
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
