The all of the VAX (and PDP11) simulators in the current simh codebase at
HTTPS://github.com/simh/simh have TU58 device support. The console devices on
the VAX750 and VAX730 simulators can boot from bootable media (device TD as I
recall). All simulators have simulated TU58s connected via simulated DL serial
ports with the device known as TDC. Up to 32 TU58 drives are supported.
- Mark
I can't seem to be able to find anywhere, and I looked at some of my own
previous posts as well as others on this list; about tu-58 tapes.
Now there are some VMS versions 3 and 4 and such that have a .TAP
extension. They are copies of actual cartridges. For vax or possibly pdp11. How
do you set the vax for those tapes? I have looked at simh docs and tried at tu
(or tk) tk0 and it seems to work but set doesn't work. Here's a link to that
page.
http://iamvirtual.ca/VAX11/VAX-11-software.html
Does simh emulate this tape? I'm sure most are familiar with this page.
Bill
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
