OK I see. I have the 3.9 that is at Simh's homepage. I can get the master at github. TYVM.
Bill ----- Original Message ----- From: Mark Pizzolato To: Bill Cunningham Cc: [email protected] Sent: Wednesday, March 23, 2016 5:21 PM Subject: Re: [Simh] TU-58 tape The all of the VAX (and PDP11) simulators in the current simh codebase at HTTPS://github.com/simh/simh have TU58 device support. The console devices on the VAX750 and VAX730 simulators can boot from bootable media (device TD as I recall). All simulators have simulated TU58s connected via simulated DL serial ports with the device known as TDC. Up to 32 TU58 drives are supported. - Mark I can't seem to be able to find anywhere, and I looked at some of my own previous posts as well as others on this list; about tu-58 tapes. Now there are some VMS versions 3 and 4 and such that have a .TAP extension. They are copies of actual cartridges. For vax or possibly pdp11. How do you set the vax for those tapes? I have looked at simh docs and tried at tu (or tk) tk0 and it seems to work but set doesn't work. Here's a link to that page. http://iamvirtual.ca/VAX11/VAX-11-software.html Does simh emulate this tape? I'm sure most are familiar with this page. Bill
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
