FWIW, A dated comment from someone at Digital indicating that Ultrix 4.3 treats DELQA and DELQA-Plus as DEQNA, and it is unlikely to ever change. http://www.verycomputer.com/7_50c10d446aeab2b0_1.htm
I also see other posts showing Ultrix 4.5 also running in DEQNA-LOCK mode. Maybe Ultrix was never upgraded to use the DELQA and DELQA-Plus enhancements. Dave -----Original Message----- From: Simh [mailto:simh-boun...@trailing-edge.com] On Behalf Of Cory Smelosky Sent: Wednesday, August 31, 2016 10:37 PM Cc: simh@trailing-edge.com Subject: EXT :Re: [Simh] Ultrix 4.0 and DEQNA-LOCK On Wed, 31 Aug 2016, Johnny Billquist wrote: > Hi. > > On 2016-08-31 17:40, Cory Smelosky wrote: > >>> Cory, could you post the output from showing the device in simh? >>> I wonder if there might be some confusion about how to turn off lock >>> mode. I've never even tried modifying that. By default, I would >>> assume it would be correctly configured, meaning it should work >>> right if you don't try to "fix it". >> >> I am doing SET DEQNALOCK to OFF, and SHOW XQ (in my initial posting >> shows that IIRC) with it in DELQA mode, and later on after probing >> and initialising it, despite DEQNALOCK set to OFF and showing as OFF, >> SHOW XQ shows it has reverted to being in DEQNA mode. > > No. You initial posting showed the dmesg output, but not the simh > input or output, unless I'm very confused. > > Johnny > set xq en set xq deqnalock=off set xq type=delqa at xq vde:/tmp/vde (BOOT/R5:0 DUA0 Simulation stopped, PC: 2004CBD9 (CMPW (R5)+,28(SP)) sim> show xq XQ address=20001920-2000192F, no vector, MAC=08:00:2B:6D:9C:95 type=DELQA, polling=disabled, sanity=OFF throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON) attached to vde:/tmp/vde sim> c [...] qe0: DEC DELQA Ethernet Interface DEQNA-lock Mode, hardware address 08:00:2b:6d:9c:95 dz0 at uba0 csr 160100 vec 300, ipl 17 dz1 at uba0 csr 160110 vec 310, ipl 17 dz2 at uba0 csr 160120 vec 320, ipl 17 dz3 at uba0 csr 160130 vec 330, ipl 17 Simulation stopped, PC: 80003551 (BEQL 800034F0) sim> show xq XQ address=20001920-2000192F, vector=3F4*, MAC=08:00:2B:6D:9C:95 type=DELQA, mode=DEQNA, polling=disabled, sanity=OFF throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON) attached to vde:/tmp/vde -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects _______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh _______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh