Hi, First of all, I find it best to "set console" right before the boot command. Second, if you are you using PuTTy you can set the keyboard mapping to either VT100+ or VT400 (Num Lock is Gold Key). Also, the Write Enabled is default so declaring isn't necessary.
Have fun, Ray On Fri, May 26, 2017 at 10:27 PM, Joe Ambrose <[email protected]> wrote: > Hi Y'all !!! > > I am trying to set up a PDP-11 emulation using RT-11..... > > I've set up a remote telnet console and I'd like to find out what VT > emulatior you find that works. > Here's my config file.... > > set console telnet=1111 > set cpu 11/23+ 256K > attach LPT lpt.txt > set rl0 writeenabled > set rl0 rl02 > attach rl0 rl0.dsk > boot rl0 > > When I sh console... this is what I get.... > > PDP-11 simulator V3.9-0 > Listening on port 1111 (socket 136) > Disabling CR > Waiting for console Telnet connection > rt11.ini> boot rl0 > Simulation stopped > sim> sh console > WRU = 5 > BRK = 0 > DEL = 10 > pchar mask = 23600 > Logging disabled > Listening on port 1111 > Debug output disabled > > My question is about the pchar mask. > What's it for? > Will it affect the escape sequences I need to emulate a VT? > > Any help is much appreciated! > > ================================================= > Joseph Ambrose > 172 Ketcham Avenue > Amityville, NY 11701 > Primary: 631-598-0528 > Mobile: 516-380-6047 > Email: [email protected] <mailto:[email protected]> > Profile: http://www.linkedin.com/in/jambrose0321 > Blog: http://houseofdoejoegetsbigger.blogspot.com/ > > > > _______________________________________________ > Simh mailing list > [email protected] > http://mailman.trailing-edge.com/mailman/listinfo/simh >
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
