Hello All , I moved my simh (ie: vaxuser) to a standalone system at my
home (info below) and now simh fails with "File open error..." , Not
understanding why this is the case . I've recompiled all the necessary
components (that I am aware of) , and then recompiled SIMH .
Would someone please point a finger at what I might be doing wrong
and/or request of me more info with the necessary commands to do so .
Tia , JimL
root@vaxbox:~# /usr/src/linux/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux vaxbox 4.4.132-smp #2 SMP Mon May 21 15:50:54 CDT 2018 i686 Intel(R)
Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
GNU C 5.5.0
GNU Make 4.1
Binutils 2.26.20160125
Util-linux 2.27.1
Mount 2.27.1
Module-init-tools 22
E2fsprogs 1.43.1
Jfsutils 1.1.15
Reiserfsprogs 3.6.24
Xfsprogs 4.3.0
Pcmciautils 018
Quota-tools 4.03
PPP 2.4.7
Linux C Library 2.23
Dynamic linker (ldd) 2.23
Linux C++ Library 6.0.21
Net-tools 1.60
Kbd 1.15.3
Console-tools 1.15.3
Sh-utils 8.25
Udev 220
Wireless-tools 29
Modules Loaded agpgart bluetooth button coretemp dcdbas drm
drm_kms_helper e1000e ehci_hcd ehci_pci evdev fb_sys_fops fjes fuse gpio_ich
hid hid_generic hwmon i2c_algo_bit i2c_core i2c_dev i2c_i801 intel_agp
intel_gtt ipv6 irqbypass kvm kvm_intel loop lpc_ich mxm_wmi nfnetlink
nfnetlink_log nfnetlink_queue nouveau pps_core processor psmouse ptp rfkill
serio_raw shpchp snd snd_hda_codec snd_hda_codec_generic snd_hda_codec_idt
snd_hda_core snd_hda_intel snd_hwdep snd_pcm snd_timer soundcore syscopyarea
sysfillrect sysimgblt tpm tpm_tis ttm tun uhci_hcd usbhid video wmi
sim> sh ver
VAXStation 3900 (KA655) simulator V4.0-0 Current
Simulator Framework Capabilities:
64b data
64b addresses
Threaded Ethernet Packet transports:PCAP:TAP:NAT:UDP
Idle/Throttling support is available
Virtual Hard Disk (VHD) support
RAW disk and CD/DVD ROM support
Asynchronous I/O support (Lock free asynchronous event queue)
Asynchronous Clock support
FrontPanel API Version 12
Host Platform:
Compiler: GCC 5.5.0
Simulator Compiled as C arch: x86 (Release Build) on Jun 24 2018 at
09:19:38
Memory Access: Little Endian
Memory Pointer Size: 32 bits
Large File (>2GB) support
SDL Video support: SDL Version 2.0.8
PCRE RegEx (Version 8.39 2016-06-14) support for EXPECT commands
OS clock resolution: 1ms
Time taken by msleep(1): 1ms
OS: Linux vaxbox 4.4.132-smp #2 SMP Mon May 21 15:50:54 CDT 2018 i686
Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
git commit id: 0fa5807e
git commit time: 2018-05-28T11:58:42-0700
sim> sh conf
VAXStation 3900 (KA655) simulator configuration
CPU idle=VMS, idle enabled, model=MicroVAX 3900 (KA655), NOAUTOBOOT
512MB, HALT to console
TLB 2 units
TLB0 8192W
TLB1 8192W
ROM address=0x20040000-0x2005ffff
128KB, 1usec calibrated access
NVR address=0x20140400-0x201407ff
1024B, attached to /home/vaxuser/VAX-DISKS/vaxZ-nvram.bin
SYSD 2 units
SYSD0
SYSD1
QBA autoconfiguration enabled
CLK vector=C0, BR6
12B
TTI vector=F8, BR4
8b
TTO vector=FC, BR4
8b
CSI vector=F0, BR4
CSO vector=F4, BR4
not attached
TDC disabled
DZ disabled
VH address=20000120-2000012F*, vector=2C0-2C4*, BR4, lines=8
attached to 65000, DHV mode, Modem
Hangup, 0 current connections
CR disabled
LPT disabled
QVSS Uncaptured Input Mode, address=20001E80-20001EBF, vector=2C8-2CC*, BR4
LK
VS
RL disabled
RQ address=20001468-2000146B, no vector, BR4, RQDX3, 4 units
RQ0 4290MB, attached to /home/vaxuser/VAX-DISKS/vaxX-vms-rq0.dsk, write
enabled
RA8U, UNIT=0, autosize
RAW format
RQ1 1505MB, attached to /home/vaxuser/VAX-DISKS/vaxX-vms-rq1.dsk, write
enabled
RA92, UNIT=1, autosize
RAW format
RQ2 625MB, attached to
/home/vaxuser/VAX-INSTALL-MEDIA/VMS-7_2-ODS-cdrom.iso, read only
RRD40, UNIT=2, autosize
RAW format
RQ3 409KB, not attached, write enabled
RX50, UNIT=3, autosize
AUTO format
RQB disabled
RQC disabled
RQD disabled
TS disabled
TQ disabled
XQ address=20001920-2000192F, no vector, BR4, MAC=08:00:2B:33:44:55
type=DELQA, polling=disabled, sanity=OFF
throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
not attached
XQB disabled
sim>
With the above I am getting ....
sim> boot cpu
No protocol specified
No protocol specified
xcb_connection_has_error() returned true
No protocol specified
xcb_connection_has_error() returned true
No protocol specified
QVSS: Error Creating Video Window: No available video device
File open error, PC: 00000000 (HALT)
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
