Hello Matt ,
On Tue, 3 Jul 2018, Matt Burke wrote:
On 03/07/2018 00:09, James W. Laferriere wrote:
So now I have a qvss window but have been wondering why after
executing the 'boot cpu' sequence that the output/input isn't
transfered to the qvss window ? Just a wondering not a difficulty
I'll try the VMS instance I have and see if it'll populate that window .
The MicroVAX 3900 console ROM does not support the QVSS so the console
won't transfer to that window. DECwindows does support the QVSS however
so at the end of the boot process you should get the graphical login
screen in the QVSS window.
I know some others were asking so for the record to get DECwindows
running you need to install the DECwindows kit and the appropriate
licence (DW-MOTIF). You also need to set the WINDOW_SYSTEM parameter in
SYSGEN. This has three settings:
0 - No Window System
1 - DECwindows
2 - VWS
If you want a VAX that supports the QVSS as a console then you'll need
to use the VAXstation I or VAXstation II simulators (microvax1, microvax2).
Matt
Thank you , (#1, for not rubbing my nose in it) and the guidence along
the way .
One (poss.) odd question is it possible to scale up the qvss window so
that it might (as close as possible) fit a new age screen ? I understand there
is physical limitation in the emulation in order to maintain appropriate
original function . But am hoping I might be able to scale the output for
less eye abuse .
Tia , JimL
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
