Hello Henry , My more recent post begs to wait till we can figure out
how to get my SIMH to 'boot cpu' , then I can try diagnosing qvss further .
Thank you for your config below . I did find out that with only either
of 'set qvss enable' or 'set cpu model=vaxstation' no more segmentation faults .
I will dig into it some more after the work on the 'file open error' .
Twyl , JimL
On Tue, 26 Jun 2018, Henry Bent wrote:
Here are the contents of my SIMH ini file, which may be of use as a
starting point. I am using the microvax2 simulator, compiled locally, and
I wonder if your difficulties stem from using a different or older
executable. What operating system and SIMH version are you using?
--
set cpu idle=ultrixold
set cpu autoboot
att nvr microvax2.nvr
set wtc time=std
set rq0 ra82
att rq0 ra82.dsk
set rq1 dis
set rq2 dis
set rq3 dis
set cr dis
set lpt dis
set rl dis
set tq0 lock
set tq1 dis
set tq2 dis
set tq3 dis
set ts dis
set tti 7b
set tto 7b
set qvss enable
set xq type=deqna
set xq MAC=08:00:2B:1C:63:00
att xq tap:tap3
set dz lines=8
set dz 7b
att dz 630
boot
--
-Henry
On 26 June 2018 at 17:15, James W. Laferriere <bab...@baby-dragons.com>
wrote:
Hello Henry ,
On Tue, 26 Jun 2018, Henry Bent wrote:
Hi JimL,
I have a fully working emulation of a MicroVAX II running Ultrix 2.3 and
X11R1 on Linux locally, with the most recent SIMH from git. Is there a
specific configuration you are looking to replicate, or have I
misunderstood your question?
-Henry
The configuration for at the simh level for one . I've tried
putting in the 'SET CPU MODEL=VAXStation' and 'SET QVSS ENABLE" got me a
segmentation fault .
With just the 'SET CPU MODEL=VAXStation' the config runs without
any difficulties . I am uninformed enough that I am worried that this
command needs other or more configuration in order to bring up *windows* at
OS runtime .
If I can get the 'Necessary' and hopefully correct 'SET' commands
that will not cause other or more difficulties .
And BTW I am being very dumbed'down in my requests above as SIMH
is of new use to me . I have a qbus varient of the 3900 (or there abouts)
which I have much time spent on .
A Ray Jewhurst , Is also looking for such info at both the SIMH
level & then in the appropriate configuration at the DecWindows level .
Tia , JimL
On 26 June 2018 at 16:27, James W. Laferriere <bab...@baby-dragons.com>
wrote:
Hello All , In my google searching for examples of (Hopefully
correct) configurations of the qvss in the VAX portion of simh . I have
come across exactly 0 (zero) configuration examples that are not
associated
with a trouble ticket or failure in some other part or device in the VAX
implementation .
Does such an example exist ?
Tia , JimL
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
