Hi James, What Linux distribution are you working on? If you've got specific input that causes segfaults, then that will be fixed as soon as a reproducible case is available.
- Mark On Tuesday, June 26, 2018 at 3:30 PM, James W. Laferriere wrote: > Hello Henry , My more recent post begs to wait till we can figure out > how to get my SIMH to 'boot cpu' , then I can try diagnosing qvss further . > > Thank you for your config below . I did find out that with only either > of 'set qvss enable' or 'set cpu model=vaxstation' no more segmentation faults > . > > I will dig into it some more after the work on the 'file open error' . > > Twyl , JimL > > On Tue, 26 Jun 2018, Henry Bent wrote: > > Here are the contents of my SIMH ini file, which may be of use as a > > starting point. I am using the microvax2 simulator, compiled locally, and > > I wonder if your difficulties stem from using a different or older > > executable. What operating system and SIMH version are you using? > > > > -- > > set cpu idle=ultrixold > > set cpu autoboot > > att nvr microvax2.nvr > > set wtc time=std > > set rq0 ra82 > > att rq0 ra82.dsk > > set rq1 dis > > set rq2 dis > > set rq3 dis > > set cr dis > > set lpt dis > > set rl dis > > set tq0 lock > > set tq1 dis > > set tq2 dis > > set tq3 dis > > set ts dis > > set tti 7b > > set tto 7b > > set qvss enable > > set xq type=deqna > > set xq MAC=08:00:2B:1C:63:00 > > att xq tap:tap3 > > set dz lines=8 > > set dz 7b > > att dz 630 > > boot > > -- > > > > -Henry > > > > On 26 June 2018 at 17:15, James W. Laferriere <bab...@baby-dragons.com> > > wrote: > > > >> Hello Henry , > >> > >> On Tue, 26 Jun 2018, Henry Bent wrote: > >> > >> Hi JimL, > >>> > >>> I have a fully working emulation of a MicroVAX II running Ultrix 2.3 and > >>> X11R1 on Linux locally, with the most recent SIMH from git. Is there a > >>> specific configuration you are looking to replicate, or have I > >>> misunderstood your question? > >>> -Henry > >>> > >> > >> The configuration for at the simh level for one . I've tried > >> putting in the 'SET CPU MODEL=VAXStation' and 'SET QVSS ENABLE" got me > a > >> segmentation fault . > >> With just the 'SET CPU MODEL=VAXStation' the config runs without > >> any difficulties . I am uninformed enough that I am worried that this > >> command needs other or more configuration in order to bring up > *windows* at > >> OS runtime . > >> > >> If I can get the 'Necessary' and hopefully correct 'SET' commands > >> that will not cause other or more difficulties . > >> > >> And BTW I am being very dumbed'down in my requests above as SIMH > >> is of new use to me . I have a qbus varient of the 3900 (or there abouts) > >> which I have much time spent on . > >> > >> A Ray Jewhurst , Is also looking for such info at both the SIMH > >> level & then in the appropriate configuration at the DecWindows level . > >> > >> Tia , JimL > >> > >> > >> On 26 June 2018 at 16:27, James W. Laferriere <babydr@baby- > dragons.com> > >>> wrote: > >>> > >>>> Hello All , In my google searching for examples of (Hopefully > >>>> correct) configurations of the qvss in the VAX portion of simh . I have > >>>> come across exactly 0 (zero) configuration examples that are not > >>>> associated > >>>> with a trouble ticket or failure in some other part or device in the VAX > >>>> implementation . > >>>> > >>>> Does such an example exist ? > >>>> > >>>> Tia , JimL > >>>> -- > >>>> +------------------------------------------------------------------+ > >>>> | James W. Laferriere | System Techniques | Give me VMS | > >>>> | Network&System Engineer | 3237 Holden Road | Give me Linux | > >>>> | bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP | > >>>> +------------------------------------------------------------------+ > >>>> _______________________________________________ > >>>> Simh mailing list > >>>> Simh@trailing-edge.com > >>>> http://mailman.trailing-edge.com/mailman/listinfo/simh > >>>> > >>> > >>> > >> -- > >> +------------------------------------------------------------------+ > >> | James W. Laferriere | System Techniques | Give me VMS | > >> | Network&System Engineer | 3237 Holden Road | Give me Linux | > >> | bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP | > >> +------------------------------------------------------------------+ > >> > > > > -- > +------------------------------------------------------------------+ > | James W. Laferriere | System Techniques | Give me VMS | > | Network&System Engineer | 3237 Holden Road | Give me Linux | > | bab...@baby-dragons.com | Fairbanks, AK. 99709 | only on AXP | > +------------------------------------------------------------------+ > _______________________________________________ > Simh mailing list > Simh@trailing-edge.com > http://mailman.trailing-edge.com/mailman/listinfo/simh _______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh
