So I found out that it takes the normal DUA and MUA but I believe there is
something wrong with the tape emulation. When I go to boot I get this
(also here is my whole boot sequence.):
MicroVAX 2000 (KA410) simulator V4.0-0 Current git commit id:
bdc677b7
/home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-1> att nvr
nvr.bin
NVR: buffering file in memory
/home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-17> at rz1
-v 2of2.tap
Tape Image '2of2.tap' scanned as SIMH format.
contains 28488848 bytes of tape data (7018 records, 185 tapemarks)
/home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-18> boot
Loading boot code from internal ka410.bin
KA410-A V2.3
F_..E...D...C?..B...A...9...8...7...6...5...4_..3_..2_..1_..
?? C 0080 0000.0004
\
>>> boot mua0
-MUA0
TVBTDRIVER halting at relative address 04FC TVBTDRIVER base addr = 000017A0
REGISTERS R0: 00000001 R1: 00000081 R2: 00000000 R3: 00000076
R4: 000061AC R5: FFFFFFFF R6: 0000000B R7: 200C0080
R8: 000001B0 R9: 00000000 R10: 00007000 R11: FFFFFFFF
AP: 00006F28 FP: 00006EEC SP: 00006EE4 PC: 00001C9C
CMDBUF: 00000002 00000806 SENSE_BUF: 00000000 00000000
STATUS_BUF: 00 SENSE_STATUS: FF
MSG_IN_BUF: 00 SENSE_MSG_IN: 00 SENSE_INDEX: FFFFFFFF
CUR_POS: 00000000 DESIRED_POS: 00000000 TM_TO_SKIP: 00000000
TM_SKIPPED: 00000000 SPACE_COUNT: 00000000 TM_ADDER: 00000000
USER_BUF_ADDR: 00007000 USER_BUF_LEN: 00000200 BYTES_LEFT_TO_READ:
000001B0
PG_TABLE_PTR: 00000000 BASE_VPN: 00000038 BUFFER_PTR: 00007050
MAP_MODE: 00000000
STACK: 0000172B
0000000A
00000000
2FFC0000
00006F5C
00006F48
HALT instruction, PC: 00002B3C (BSBW 5D70)
sim>
I have tried it with both 5.3 and 5.5-2H4 with no luck. I know the 2H4
image is good because I used it to do an install on the 3900.
And here's my config file:
att nvr nvr.bin
set rd0 enable
set rd1 enable
set rd2 enable
set rd0 rd54
set rd1 rd54
set rd2 rx33
set rz1 tzk50
set rz2 dis
set rz3 dis
set rz4 dis
set rz5 dis
set rz6 dis
set rz7 dis
at rd0 d0.dsk
at rd1 d1.dsk
at rz1 -v 2of2.tap
boot
Any more advice (and I know I've asked for a lot) would be appreciated.
Thanks,
Ray
On Sat, Nov 16, 2019 at 9:35 PM Ray Jewhurst <raywjewhu...@gmail.com> wrote:
> Mark,
> Nope. This is what I get:
>
> >>> show dev
>
> ?18 INV DGT
> >>>
> I am running the latest build btw.
>
> Thanks
>
> Ray
>
> On Sat, Nov 16, 2019 at 9:32 PM Mark Pizzolato <m...@infocomm.com> wrote:
>
>> I would start with a SHOW DEV when you get to the >>> prompt.
>>
>>
>>
>> *From:* Simh [mailto:simh-boun...@trailing-edge.com] *On Behalf Of *Ray
>> Jewhurst
>> *Sent:* Saturday, November 16, 2019 6:30 PM
>> *To:* simh <simH@trailing-edge.com>
>> *Subject:* [Simh] MicroVAX 2000 simulator
>>
>>
>>
>> I have decided to try out the MicroVAX 2000 simulator running VMS 5.5-2H4
>> off a TK50. Problem is, I don't know VAX/VMB names for the RD disk drive or
>> the TZK50 SCSI tape drive. Any help would be appreciated.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Ray
>>
>
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
