Hi Ray, I believe it is. B MU0 or B DU0 Also from the >>> prompt. T 50 ls the equivalent of SHO DEV on later VAX models. Cheers.
Sent from my iPhone > On 17 Nov 2019, at 15:38, Ray Jewhurst <raywjewhu...@gmail.com> wrote: > > So I found out that it takes the normal DUA and MUA but I believe there is > something wrong with the tape emulation. When I go to boot I get this (also > here is my whole boot sequence.): > > MicroVAX 2000 (KA410) simulator V4.0-0 Current git commit id: bdc677b7 > /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-1> att nvr > nvr.bin > NVR: buffering file in memory > /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-17> at rz1 -v > 2of2.tap > Tape Image '2of2.tap' scanned as SIMH format. > contains 28488848 bytes of tape data (7018 records, 185 tapemarks) > /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-18> boot > Loading boot code from internal ka410.bin > > > > KA410-A V2.3 > > F_..E...D...C?..B...A...9...8...7...6...5...4_..3_..2_..1_.. > > > ?? C 0080 0000.0004 > \ > >>> boot mua0 > > > -MUA0 > TVBTDRIVER halting at relative address 04FC TVBTDRIVER base addr = 000017A0 > REGISTERS R0: 00000001 R1: 00000081 R2: 00000000 R3: 00000076 > R4: 000061AC R5: FFFFFFFF R6: 0000000B R7: 200C0080 > R8: 000001B0 R9: 00000000 R10: 00007000 R11: FFFFFFFF > AP: 00006F28 FP: 00006EEC SP: 00006EE4 PC: 00001C9C > CMDBUF: 00000002 00000806 SENSE_BUF: 00000000 00000000 > STATUS_BUF: 00 SENSE_STATUS: FF > MSG_IN_BUF: 00 SENSE_MSG_IN: 00 SENSE_INDEX: FFFFFFFF > CUR_POS: 00000000 DESIRED_POS: 00000000 TM_TO_SKIP: 00000000 > TM_SKIPPED: 00000000 SPACE_COUNT: 00000000 TM_ADDER: 00000000 > USER_BUF_ADDR: 00007000 USER_BUF_LEN: 00000200 BYTES_LEFT_TO_READ: > 000001B0 > PG_TABLE_PTR: 00000000 BASE_VPN: 00000038 BUFFER_PTR: 00007050 > MAP_MODE: 00000000 > STACK: 0000172B > 0000000A > 00000000 > 2FFC0000 > 00006F5C > 00006F48 > > HALT instruction, PC: 00002B3C (BSBW 5D70) > sim> > > I have tried it with both 5.3 and 5.5-2H4 with no luck. I know the 2H4 image > is good because I used it to do an install on the 3900. > > And here's my config file: > > att nvr nvr.bin > set rd0 enable > set rd1 enable > set rd2 enable > set rd0 rd54 > set rd1 rd54 > set rd2 rx33 > set rz1 tzk50 > set rz2 dis > set rz3 dis > set rz4 dis > set rz5 dis > set rz6 dis > set rz7 dis > at rd0 d0.dsk > at rd1 d1.dsk > at rz1 -v 2of2.tap > boot > > Any more advice (and I know I've asked for a lot) would be appreciated. > > Thanks, > > Ray > > >> On Sat, Nov 16, 2019 at 9:35 PM Ray Jewhurst <raywjewhu...@gmail.com> wrote: >> Mark, >> Nope. This is what I get: >> >> >>> show dev >> >> ?18 INV DGT >> >>> >> I am running the latest build btw. >> >> Thanks >> >> Ray >> >>> On Sat, Nov 16, 2019 at 9:32 PM Mark Pizzolato <m...@infocomm.com> wrote: >>> I would start with a SHOW DEV when you get to the >>> prompt. >>> >>> >>> >>> From: Simh [mailto:simh-boun...@trailing-edge.com] On Behalf Of Ray Jewhurst >>> Sent: Saturday, November 16, 2019 6:30 PM >>> To: simh <simH@trailing-edge.com> >>> Subject: [Simh] MicroVAX 2000 simulator >>> >>> >>> >>> I have decided to try out the MicroVAX 2000 simulator running VMS 5.5-2H4 >>> off a TK50. Problem is, I don't know VAX/VMB names for the RD disk drive or >>> the TZK50 SCSI tape drive. Any help would be appreciated. >>> >>> >>> >>> Thanks, >>> >>> >>> >>> Ray >>> > _______________________________________________ > Simh mailing list > Simh@trailing-edge.com > http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh
