Hi Michael, Just to let you know dfu-util 0.9 didn't worked for me either, but SAM-BA/sam7utils did!
I just followed this simtrace wiki page instructions to do so (flashing using libusb): https://osmocom.org/projects/simtrace/wiki/SIMtrace_Firmware The wiki page has the firmware attached in the format required by SAM-BA. I compiled it myself with the arm toolchain, though. The tricky part was switching to SAM-BA mode, what the wiki page says is true: sometimes it just not works ... After 3 or 4 attempts it worked. I hope this helps. Regards. 2016-10-16 22:28 GMT+02:00 Holger Freyther <hol...@freyther.de>: > > > > On 16 Oct 2016, at 22:15, Michael Kramer <michael.kra...@uni-konstanz.de> wrote: > > > > > > Am Freitag, 14. Oktober 2016 22:19 CEST, Holger Freyther < hol...@freyther.de> schrieb: > > > >>> > >>> I've tried both dfu-utils 0.8 and 0.9 on a debian and kali machine. Haven't used SAM-BA yet. Should I try that as well? > >> > >> SAM-BA is a lot more inconvenient and slower than dfu-utils. Could you try an older version of dfu-utils? E.g. I started with dfu-utils and probably still have this version around. > > > > Could you maybe check which version it was? > > oh. I did and then didn't write it down. It was dfu-util 0.4 that I have used in > the past. > > holger -- J. Félix Ontañón Director of R&D Podsystem Group
