Hi,

Actually, that is not possible. Both the Status Line and the Warning
header are for responses only, and CANCEL is a request...

At least I think the issue was how the cause code could be included in
the CANCEL request. Or?

Regards,

Christer Holmberg
Ericsson Finland



Hisham Khartabil wrote:
> 
> You can either use the Reason Phrase in the Status Line or the Warning:
> header
> 
> Regards,
> Hisham
> Hotsip
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Jae-Min Ahn
> Sent: Wednesday, 28 March 2001 4:45 AM
> To: Christer Holmberg
> Cc: [EMAIL PROTECTED]
> Subject: RE: [Sip-implementors] Question about CANCEL usage..
> 
> Thank you for your attention..
> 
> As I mentioned before, I had a look at the SIP-ISUP draft:
>  http://www.ietf.org/internet-drafts/draft-ietf-sip-isup-00.txt
> 
> In above draft, I could find only one-directional solution.. i.e. SIP ->
> PSTN calling case
> When a SIP phone is a caller and a PSTN telephone is a callee, REL cause
> value could be mapped into SIP response code..
> 
> Like this..
> 
>      ISUP Cause value                        SIP response
>              ----------------                        ------------
>      1  unallocated number                   410 Gone
>      2  no route to network                  404 Not found
>      3  no route to destination              404 Not found
>      4  send special information tone        ---
>      16 normal call clearing                 ---
>      17 user busy                            486 Busy here
>      18 no user responding                   480 Temporarily unavailable
>      19 no answer from the user              480 Temporarily unavailable
>      21 call rejected                        603 Decline
>      22 number changed                       301 Moved Permanently
>      27 destination out of order             404 Not found
>      28 address incomplete                   484 Address incomplete
>      29 facility rejected                    501 Not implemented
>      31 normal unspecified                   480 Temporarily unavailable
> 
> But when a SIP phone is a callee and PSTN telephone is a caller, how can I
> convey a "ISUP REL cause value"  with a SIP CANCEL message??
> According to draft, the REL message may be included in the CANCEL message
> body..
> But I need only the cause value, not the whole REL message..
> So I want to find a way to convey a cause value using a proper SIP header
> filed in CANCEL message..
> 
> Does anybody have an idea on this??
> 
>  -----Original Message-----
>  From: [EMAIL PROTECTED]
>  [mailto:[EMAIL PROTECTED]]On Behalf Of
>  Christer Holmberg
>  Sent: Tuesday, March 27, 2001 9:39 PM
>  To: [EMAIL PROTECTED]
>  Cc: [EMAIL PROTECTED]
>  Subject: Re: [Sip-implementors] Question about CANCEL usage..
> 
>  Hi,
> 
>  You probably want to have a look at the SIP-ISUP draft:
> 
>  http://www.ietf.org/internet-drafts/draft-ietf-sip-isup-00.txt
> 
>  Regards,
> 
>  Christer Holmberg
>  Ericsson Finland
> 
>  Jae-Min Ahn wrote:
>  >
>  > Thank you for your attention..
>  >
>  > I agree with you that REL can be mapped into a CANCEL..
>  > But I want to find a way to convey REL "cause parameter" with
>  CANCEL message..
>  > In RFC 2543 and some related drafts, I could not find a SIP
>  header which can properly convey a "cause" value in CANCEL request..
>  >
>  > Does anybody have an idea on this??
>  >
>  >  -----Original Message-----
>  >  From: [EMAIL PROTECTED]
>  >  [mailto:[EMAIL PROTECTED]]On Behalf Of
>  >  Christer Holmberg
>  >  Sent: Tuesday, March 27, 2001 8:22 PM
>  >  To: [EMAIL PROTECTED]
>  >  Cc: [EMAIL PROTECTED]
>  >  Subject: Re: [Sip-implementors] Question about CANCEL usage..
>  >
>  >
>  >
>  >  Hi,
>  >
>  >  >Hi,
>  >  >
>  >  >I have a question about "CANCEL" usage..
>  >  >When a caller wants to cancel the call, he sends "CANCEL" request to a
>  >  >callee..
>  >
>  >  CANCEL is used when one wants to cancel a TRANSACTION, so in your case
>  >  you would use it to cancel the INVITE if you haven't received a final
>  >  response for it.
>  >
>  >  >Is it possible to convey a "cause" parameter with CANCEL request??
>  >  >In some application like a PSTN Gateway , it is helpful to convey the
>  >  >reason for canceling..
>  >  >According to "draft-ietf-sip-isup-00.txt", REL message may be included
>  >  >in the CANCEL message body..
>  >  >I hope to find a way to convey a cause using a proper SIP header
>  >  >field..
>  >  >Can anybody help me??
>  >
>  >  REL is mapped into a CANCEL if you haven't received the final response
>  >  for your INVITE, otherwise you map it into a BYE. Note that you can also
>  >  map it into BYE even if you have NOT received the final response yet.
>  >
>  >  Regards,
>  >
>  >  Christer Holmberg
>  >  Ericsson Finland
>  >
>  >
>  >
>  >  >
>  >  > Thank you..
>  >  >
>  >  >
>  >  > +------------------------------------------+
>  >  >   Jae-Min Ahn
>  >  >   Senior Engineer
>  >  >
>  >  >   Contela, Inc.
>  >  >   9-1 Sunae-dong, Pundang-gu,
>  >  >   Sungnam City, Kyunggi-do 463-784, Korea
>  >  >   Mobile:    +82-11-9076-6104
>  >  >   Tel:         +82-342-601-5830~3 (ext:109)
>  >  >   Fax:        +82-342-602-5830
>  >  >   Email:      [EMAIL PROTECTED]
>  >  > +------------------------------------------+
>  >  >
> _______________________________________________
> Sip-implementors mailing list
> [EMAIL PROTECTED]
> http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
begin:vcard 
n:Holmberg;Christer
tel;cell:+358-40-5604412
tel;work:+358-9-2992943
x-mozilla-html:FALSE
org:Ericsson;IP Multimedia / Advanced Signalling Research Laboratory
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
title:System Designer
fn:Christer Holmberg
end:vcard

Reply via email to