> Hi all, > i have downloaded Ubiquity User Agent "SIP_User_Agent_2.0" From > sipcenter to test my useragent. the first test i conducted is as > follows..
There is a forum at the SIP Center where you downloaded the UA from to ask this type of question. Implementation specific issues don't really belong here. http://www.sipcenter.com/devarea/forum.htm Thanks, Neil -- Ubiquity Software Corporation, UK http://www.ubiquity.net > 1. Sending INVITE from Ubiquity UA (UA-1) to my UA(UA-2). > 2. UA-2 replies with 100 (Trying) > 3. UA-1 displays TRYING on its status bar > 4. UA-2 sends 180 (Ringing). > 5. UA-1 displays RINGING on its status bar > 6. UA-2 sends 200 (OK) ... it retransmits for 7 times waiting for > ACK from UA-1 > 7. UA-1 receives 200 ( i can see that using packet capture utility). > 8. now UA-1 generates ACK message, > but in this ACK message contains badly formed Request URI as > " sip:sip:100.10.1.55 " > two times "sip:sip:" is there and the address it is pointing ..i.e > "100.10.1.55" is the machine where it is running. > even the packet capture utility does not record any ACK message from > UA-1 to UA-2 ?? (may be loop back).. > 9. UA-2 after retransmission of 200 (OK) message disconnects. > > so..what i'm donig is correct?? is this a bug in UA-1 ?? > > plz give me ursuggesion abt it. > > also if any one can plz let me know abt other UA which i can download > ant test my UA for RFC compliance! > > TIA > Sachin K > > Enjoy being an Indyan at http://www.indya.com > _______________________________________________ > Sip-implementors mailing list > [EMAIL PROTECTED] > http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list [EMAIL PROTECTED] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
