Hi Milan
Refer to
http://www.ietf.org/internet-drafts/draft-ietf-sipping-service-examples-07.txt.
You'll find examples for Call Transfer (Blind & Attended) and Call Forward there.
Regards,
Jerry Ipe Thomas
Engineer(R&D)
D-Link India Ltd.
Software & R&D Center
Bangalore - 68
Ph: +91-80-26788350/1 Extn: 117
Mob: +919886442530
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 28, 2004 5:45 PM
To: [EMAIL PROTECTED]
Subject: [Sip-implementors] Testing Call Transfer Blind &
Attended/CallForward...
Hi,
I am in the process of testing Call Xfer Blind & Attended , Call Forward
feature for our product. I would like to know what are the field values in
each packets exchanged between the 2 UAs that I should look for to prove
the same works for my product.
Eg: SIP Phone A makes call to SIP Phone B. RTP Packets get Xchanged
between the 2 UAs. SIP Phone B puts the same call on Hold.
In this eg: I need to check the "c" field in the Re-INVITE packet sent from
SIP Phone B to SIP Phone A with the value "C=IN IP4 0.0.0.0 to prove that
the call is actually on hold apart from the fact that RTP packets do not
get exchanged between the 2 UAs while the call is on hold.
Likewise, what do I need to check for Call Transfer (Blind & Attended) and
Call Forward??? Any good pointers to test the same features would be highly
appreciated.
Thanks in advance...
Regards,
Milan Sengupta.
_______________________________________________
Sip-implementors mailing list
[EMAIL PROTECTED]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
