Diego, Prabhan,
Just a thought - have you looked at KPML ?
(draft-ietf-sipping-kpml-07).
- Wayne
*****************************************
Hi;
A quick guest,
You can send a multipart message with 3 basic parts each one with
application/dtmf-relay.
Regards
Diego B
prabhan wrote:
> Hello,
> Can single INFO request be used to send multiple dtmf-relay information ?
>
> For my application , i want to use INFO request to send dtmf
> information.
> Suppose i want to convey to the remote end that the local end has dialed
> dtmf digits 1 for duration 105ms, 2 for duration 110ms and 3 for
> duration 115ms.
> Do i have to send three different INFO packets as shown below
>
> INFO sip:[EMAIL PROTECTED] SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.36:5060
> From: <sip:[EMAIL PROTECTED]>;tag=43
> To: <sip:[EMAIL PROTECTED]>;tag=9753
> Call-ID: [EMAIL PROTECTED]
> CSeq: 2 INFO
> Content-Length: 26
> Content-Type: application/dtmf-relay
>
> Signal= 1
> Duration= 105
>
> INFO sip:[EMAIL PROTECTED] SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.36:5060
> From: <sip:[EMAIL PROTECTED]>;tag=43
> To: <sip:[EMAIL PROTECTED]>;tag=9753
> Call-ID: [EMAIL PROTECTED]
> CSeq: 3 INFO
> Content-Length: 26
> Content-Type: application/dtmf-relay
>
> Signal= 2
> Duration= 110
>
> INFO sip:[EMAIL PROTECTED] SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.36:5060
> From: <sip:[EMAIL PROTECTED]>;tag=43
> To: <sip:[EMAIL PROTECTED]>;tag=9753
> Call-ID: [EMAIL PROTECTED]
> CSeq: 4 INFO
> Content-Length: 26
> Content-Type: application/dtmf-relay
>
> Signal= 3
> Duration= 115
> Or is there any other mode of sending the details of all three digits
> in single INFO packet ?
>
> Thanks,
> Prabha N
>
> _______________________________________________
> Sip-implementors mailing list
> [email protected]
> http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
>
>
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
**********************************************************************
Any personal or sensitive information contained in this email and
attachments must be handled in accordance with the Victorian Information
Privacy Act 2000, the Health Records Act 2001 or the Privacy Act 1988
(Commonwealth), as applicable.
This email, including all attachments, is confidential. If you are not the
intended recipient, you must not disclose, distribute, copy or use the
information contained in this email or attachments. Any confidentiality or
privilege is not waived or lost because this email has been sent to you in
error. If you have received it in error, please let us know by reply
email, delete it from your system and destroy any copies.
**********************************************************************
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
