If the transport is UDP then UA must retransmit request again if it does
not receive any response within T1 time period. Default value of T1 is
500 ms.

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
Sambasiva Rao Manchili
Sent: Tuesday, March 22, 2011 11:29 AM
To: Worley, Dale R (Dale); Sambasiva Rao MANCHILI;
[email protected]
Subject: Re: [Sip-implementors] SIP UDP packet loss?


Hi Dale,
I think SIP does not retransmit messages.
Pacekt loss rate when Speech is enabled  is seen upto 10%.

After further investigation in last two days, we found that by
increasing priority of network Task we have gained more performance on
Speech test and
very very less packet loss is seen(0.05%) than before.


Samba.

-----Original Message-----
From: Worley, Dale R (Dale) [mailto:[email protected]]
Sent: Monday, 21. March, 2011 17:22
To: Sambasiva Rao MANCHILI; [email protected]
Cc: Sambasiva Rao Manchili
Subject: RE: [Sip-implementors] SIP UDP packet loss?

________________________________________
From: [email protected]
[[email protected]] On Behalf Of Sambasiva
Rao MANCHILI [[email protected]]

When we are simulating just SIP signalling messages between our two test
systems at the rate of  greater than 500  UDP packets per second, we
observed some of Subscribers fail Signalling.After further
investigations it is found that UDP packets are lost  consequently
Signalling is failing for some subscribers intermittently.
_______________________________________________

It's difficult to tell what might be going wrong and what might be done
to fix it because UDP is, by specification, unreliable.  As a result,
various components of UDP implementations (including the transceiver
hardware, the low-level drivers, and the UDP stack, often feel free to
cope with various problem situations by discarding packets.  After all,
you are dealing with a data flow of maybe
5 megabits per second.

If you want reliable transfer of data at speeds comparable to the
capacity of the system, you need to use a protocol with reliability
features.

Another question to ask is what is the overall packet loss rate.  You
should be seeing losses less than 1%, and given that SIP will retransmit
UDP requests, no single UA should see a large enough string of losses to
cause failure of signaling.  Perhaps the UAs do not retransmit UDP
requests like they should?

Dale


This email and any attachment may contain confidential information which
is intended for use only by the addressee(s) named above. If you
received this email by mistake, please notify the sender immediately,
and delete the email from your system. You are prohibited from copying,
disseminating or otherwise using the email or any attachment.


_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

Reply via email to