I guess UE should not send Inital Register when Notify:terminated with
event:rejected comes from server
deactivated – this event occurs when the binding is removed by the network
(e.g., due to a network-initiated de-registration),
allowing the user to perform a new initial
registration attempt afterwards
. Example would be movement from LTE to WIFI (both
supports IMS)
rejected – this event occurs when the network does not allow the user to
register the specific contact.
Thanks & regards
Ankur Bansal
On Wed, Apr 23, 2014 at 9:53 AM, Praveena Ss <ss.prave...@gmail.com> wrote:
> Hi Raju,
>
> There are two cases, as i try to described here after going through -
>
> http://www.cablelabs.com/wp-content/uploads/specdocs/PKT-SP-24.229-I06-100120.pdf
>
> *case-1*: Terminated/Deactivated - the UE shall start the initial
> registration procedure. i.e., no need to release the dialogs related to
> those public user identities by the UE .its a straight forward step.
>
> *case-2:* Terminated/Rejected - the UE shall release all dialogs related to
> those public user identities. Here also UE should send initial registration
> (with new dialog) but after what time of NOTIFY is received is not
> cleared... i think its may be implementation dependent.
>
> i think above clarifies your doubt.
>
>
> Thanks and Regards,
> Praveen
>
>
> On Tue, Apr 22, 2014 at 7:57 PM, Raghu <raghujin...@gmail.com> wrote:
>
> > Hello Experts,
> > The MTA device sends a initial registration upon sending below xml info
> in
> > NOTIFY request reg event. Is this expected behaviour?
> >
> > <registration aor="sip:91xx-ci...@ims.com" id="e3bAR139724101056"
> state="
> > *terminated*"><contact id="AR139724101056" state="*terminated*" event="
> > *rejected*"><uri>sip:9...@10.xx.xx.xx
> > :5060</uri><unknown-param<sip:9...@10.xx.xx.xx
> > :5060%3c/uri%3e%3cunknown-param>
> > name="audio"/></contact></registration>
> >
> > As per spec PKT24.229 section 5.1.1.7, if the registration state
> attribute
> > set to terminated and event attribute in contact is set to rejected the
> UE
> > shall release all dialogs related to those public user identities.
> > But I see the device sends a initial registration message upon sending
> the
> > xml info with the mentioned attributes. Does the statement "UE shall
> > release all dialogs related to those public user identities" mean sending
> > the init-reg message? Please clarify.
> >
> > Appreciate your help.
> > --
> > Thanks
> > Raghu
> > SAVE TREES..GO GREEN
> > _______________________________________________
> > Sip-implementors mailing list
> > Sip-implementors@lists.cs.columbia.edu
> > https://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
> >
> _______________________________________________
> Sip-implementors mailing list
> Sip-implementors@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
>
_______________________________________________
Sip-implementors mailing list
Sip-implementors@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
