On Tue, Apr 28, 2009 at 1:40 AM, Paul Fugere <[email protected]> wrote: > I have been using the uac.xml. Not sure how to modify it to accept these > Register requests.
Hum. What exactly are you trying to simulate with SIPp? From your initial post, I assumed you were trying to simulate a SIP client (a SIP phone maybe). But a SIP client is not supposed to be receiving REGISTER requests. That would be a registrar server. You can use SIPp to simulate that too, but I don't know how to make it simulate both at the same time bound to the same port. And a don't think that's what you are trying to do. Usually, I simulate and test separate operations. > I am using this base scenario because I believe that since the re-invite is > done from the SIP provider, that it should work for a regular set-up. > > On Mon, Apr 27, 2009 at 12:24 PM, mayamatakeshi <[email protected]> > wrote: >> >> On Tue, Apr 28, 2009 at 1:00 AM, Paul Fugere <[email protected]> >> wrote: >> > Thinking about it, since the Trunk is initiating the re-invite, I might >> > be >> > going about the hard way by trying to initiate it from my SIPP. >> > >> > Is it possible to spoof it so that SIPP can act as a registered phone on >> > my >> > PBX and contact an external phone number? I remember trying this and I >> > was >> > receiving errors because it was discarding a Register packet. >> >> Sorry, I could not visualize your scenario (why there is a >> Registration now in it?). >> Maybe you could try to write the xml (it doesn't take much time) and >> check where it fails. > > > > -- > Paul Fugere > [email protected] > 2T Computer Engineering > Engineering Society 'A' > Iron Warrior Advisory Board - A-Soc-At-Large > Bowling Director > Novelties Director > POETS Manager > POETS Programmer > ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Sipp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sipp-users
