Sorry if I wasn't clear on my problem/request.
What I am trying to simulate is a SIP client to call through a PBX to a
phone under another PBX. Since both of these PBX machines share the same SIP
provider, the SIP provider will send a re-invite request so that the
communication occurs directly between the phones instead of the SIP
provider.
On Mon, Apr 27, 2009 at 12:56 PM, mayamatakeshi <[email protected]>wrote:
> On Tue, Apr 28, 2009 at 1:40 AM, Paul Fugere <[email protected]>
> wrote:
> > I have been using the uac.xml. Not sure how to modify it to accept these
> Register requests.
>
> Hum. What exactly are you trying to simulate with SIPp? From your
> initial post, I assumed you were trying to simulate a SIP client (a
> SIP phone maybe). But a SIP client is not supposed to be receiving
> REGISTER requests. That would be a registrar server. You can use SIPp
> to simulate that too, but I don't know how to make it simulate both at
> the same time bound to the same port. And a don't think that's what
> you are trying to do.
> Usually, I simulate and test separate operations.
>
> > I am using this base scenario because I believe that since the re-invite
> is
> > done from the SIP provider, that it should work for a regular set-up.
> >
> > On Mon, Apr 27, 2009 at 12:24 PM, mayamatakeshi <[email protected]
> >
> > wrote:
> >>
> >> On Tue, Apr 28, 2009 at 1:00 AM, Paul Fugere <[email protected]
> >
> >> wrote:
> >> > Thinking about it, since the Trunk is initiating the re-invite, I
> might
> >> > be
> >> > going about the hard way by trying to initiate it from my SIPP.
> >> >
> >> > Is it possible to spoof it so that SIPP can act as a registered phone
> on
> >> > my
> >> > PBX and contact an external phone number? I remember trying this and I
> >> > was
> >> > receiving errors because it was discarding a Register packet.
> >>
> >> Sorry, I could not visualize your scenario (why there is a
> >> Registration now in it?).
> >> Maybe you could try to write the xml (it doesn't take much time) and
> >> check where it fails.
> >
> >
> >
> > --
> > Paul Fugere
> > [email protected]
> > 2T Computer Engineering
> > Engineering Society 'A'
> > Iron Warrior Advisory Board - A-Soc-At-Large
> > Bowling Director
> > Novelties Director
> > POETS Manager
> > POETS Programmer
> >
>
--
Paul Fugere
[email protected]
2T Computer Engineering
Engineering Society 'A'
Iron Warrior Advisory Board - A-Soc-At-Large
Bowling Director
Novelties Director
POETS Manager
POETS Programmer
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensign option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
