You mean:
<send>
<![CDATA[
INFO sip:[servi...@[remote_ip]:[remote_port] SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
From: sipp <sip:s...@[local_ip]:[local_port]>;tag=[call_number]
To: sut <sip:[servi...@[remote_ip]:[remote_port]>
Call-ID: [call_id]
CSeq: 2 INFO
Contact: sip:s...@[local_ip]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Type: application/MediaServerControl+xml
Content-Length: [len]
-------------- blank line -----------------------
<?xml version="1.0"?>
<MediaServerControl version="1.0">
<request>
<play >
<prompt locale="en_US">
<audio url="******/XYZ.wav" gain="0" gaindelta="0" rate="0"
ratedelta="0" encoding="" />
</prompt>
</play>
</request>
</MediaServerControl>
]]>
</send>
If I remember well it already had this blank line and it didn't worked.
I removed the blank line to check if something would change.
Anyway tomorrow I'll try again.
Thanks,
Evan
2010/9/16 Peter Higginson <plh...@hotmail.com>
> As a quick guess you need a blank line after the SIP headers to separate
> them from the data.
>
> ------------------------------
> Date: Thu, 16 Sep 2010 19:28:46 +0200
> From: eba...@gmail.com
> To: sipp-users@lists.sourceforge.net
> Subject: [Sipp-users] Question about Content-Length field
>
>
> Hi all,
> I have a problem while simulating a simple scenario.
>
> It seems that all packets are sent/received until I reach the 6th message
> (INFO).
> At this point I should send an INFO message with some xml data
> (MediaServerControl)
>
> <send>
> <![CDATA[
> INFO sip:[servi...@[remote_ip]:[remote_port] SIP/2.0
> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
> From: sipp <sip:s...@[local_ip]:[local_port]>;tag=[call_number]
> To: sut <sip:[servi...@[remote_ip]:[remote_port]>
> Call-ID: [call_id]
> CSeq: 2 INFO
> Contact: sip:s...@[local_ip]:[local_port]
> Max-Forwards: 70
> Subject: Performance Test
> Content-Type: application/MediaServerControl+xml
> Content-Length: [len]
> <?xml version="1.0"?>
> <MediaServerControl version="1.0">
> <request>
> <play >
> <prompt locale="en_US">
> <audio url="******/XYZ.wav" gain="0" gaindelta="0" rate="0"
> ratedelta="0" encoding="" />
> </prompt>
> </play>
> </request>
> </MediaServerControl>
> ]]>
> </send>
>
>
> After simulation I can read in the *messages.log file:
>
> INFO sip:i...@***.***.***.***:**** SIP/2.0
> Via: SIP/2.0/UDP ***.***.***.***:****;branch=z9hG4bK-1-6
> From: sipp <sip:s...@***.***.***.***:****>;tag=1
> To: sut <sip:i...@***.***.***.***:****>
> Call-ID: 1-22...@***.***.***.***
> CSeq: 2 INFO
> Contact: sip:s...@***.***.***.***:****
> Max-Forwards: 70
> Subject: Performance Test
> Content-Type: application/MediaServerControl+xml
> *Content-Length: 0*
>
> Why the content length is 0?
> I guess that the [len] var is calculated by sipp on the basis of the xml
> content and replaced before sending the message.
> I can't understand why it doesn't work: I checked the syntax, new line
> chars and I also removed some spaces between the lines but nothing.
> What's wrong with my xml scenario?
> Maybe the parameter "Content-Type: application/MediaServerControl+xml" is
> wrong?
>
> Thank you very much for helping,
> Evan
>
> ------------------------------------------------------------------------------
> Start uncovering the many advantages of virtual appliances and start using
> them to simplify application deployment and accelerate your shift to cloud
> computing. http://p.sf.net/sfu/novell-sfdev2dev
> _______________________________________________ Sipp-users mailing list
> Sipp-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
