You were right Peter, now it works!
Thanks a lot,
Evan
2010/9/16 Evan Papaioannu <eba...@gmail.com>
> You mean:
>
> <send>
> <![CDATA[
> INFO sip:[servi...@[remote_ip]:[remote_port] SIP/2.0
> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
> From: sipp <sip:s...@[local_ip]:[local_port]>;tag=[call_number]
> To: sut <sip:[servi...@[remote_ip]:[remote_port]>
> Call-ID: [call_id]
> CSeq: 2 INFO
> Contact: sip:s...@[local_ip]:[local_port]
> Max-Forwards: 70
> Subject: Performance Test
> Content-Type: application/MediaServerControl+xml
> Content-Length: [len]
> -------------- blank line -----------------------
> <?xml version="1.0"?>
> <MediaServerControl version="1.0">
> <request>
> <play >
> <prompt locale="en_US">
> <audio url="******/XYZ.wav" gain="0" gaindelta="0" rate="0"
> ratedelta="0" encoding="" />
> </prompt>
> </play>
> </request>
> </MediaServerControl>
> ]]>
> </send>
>
> If I remember well it already had this blank line and it didn't worked.
> I removed the blank line to check if something would change.
>
> Anyway tomorrow I'll try again.
> Thanks,
> Evan
>
>
> 2010/9/16 Peter Higginson <plh...@hotmail.com>
>
> As a quick guess you need a blank line after the SIP headers to separate
>> them from the data.
>>
>> ------------------------------
>> Date: Thu, 16 Sep 2010 19:28:46 +0200
>> From: eba...@gmail.com
>> To: sipp-users@lists.sourceforge.net
>> Subject: [Sipp-users] Question about Content-Length field
>>
>>
>> Hi all,
>> I have a problem while simulating a simple scenario.
>>
>> It seems that all packets are sent/received until I reach the 6th message
>> (INFO).
>> At this point I should send an INFO message with some xml data
>> (MediaServerControl)
>>
>> <send>
>> <![CDATA[
>> INFO sip:[servi...@[remote_ip]:[remote_port] SIP/2.0
>> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
>> From: sipp <sip:s...@[local_ip]:[local_port]>;tag=[call_number]
>> To: sut <sip:[servi...@[remote_ip]:[remote_port]>
>> Call-ID: [call_id]
>> CSeq: 2 INFO
>> Contact: sip:s...@[local_ip]:[local_port]
>> Max-Forwards: 70
>> Subject: Performance Test
>> Content-Type: application/MediaServerControl+xml
>> Content-Length: [len]
>> <?xml version="1.0"?>
>> <MediaServerControl version="1.0">
>> <request>
>> <play >
>> <prompt locale="en_US">
>> <audio url="******/XYZ.wav" gain="0" gaindelta="0" rate="0"
>> ratedelta="0" encoding="" />
>> </prompt>
>> </play>
>> </request>
>> </MediaServerControl>
>> ]]>
>> </send>
>>
>>
>> After simulation I can read in the *messages.log file:
>>
>> INFO sip:i...@***.***.***.***:**** SIP/2.0
>> Via: SIP/2.0/UDP ***.***.***.***:****;branch=z9hG4bK-1-6
>> From: sipp <sip:s...@***.***.***.***:****>;tag=1
>> To: sut <sip:i...@***.***.***.***:****>
>> Call-ID: 1-22...@***.***.***.***
>> CSeq: 2 INFO
>> Contact: sip:s...@***.***.***.***:****
>> Max-Forwards: 70
>> Subject: Performance Test
>> Content-Type: application/MediaServerControl+xml
>> *Content-Length: 0*
>>
>> Why the content length is 0?
>> I guess that the [len] var is calculated by sipp on the basis of the xml
>> content and replaced before sending the message.
>> I can't understand why it doesn't work: I checked the syntax, new line
>> chars and I also removed some spaces between the lines but nothing.
>> What's wrong with my xml scenario?
>> Maybe the parameter "Content-Type: application/MediaServerControl+xml" is
>> wrong?
>>
>> Thank you very much for helping,
>> Evan
>>
>> ------------------------------------------------------------------------------
>> Start uncovering the many advantages of virtual appliances and start using
>> them to simplify application deployment and accelerate your shift to cloud
>> computing. http://p.sf.net/sfu/novell-sfdev2dev
>> _______________________________________________ Sipp-users mailing list
>> Sipp-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/sipp-users
>>
>
>
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
