i am executing my test case using sipp, the flow will as follows
sipp -> proxy -> softphone
i am sending Invite from my script and getting 407. when second time i send invite with [authentication username= password=]
i am geting 407 again. i expect there is some error in my script, but i am unable to find it out.
My script is as belows
<send retrans="500">
<![CDATA[
INVITE sip:bob@[remote_ip]:[remote_port] SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
From: "alice" <sip:alice@[local_ip]:[local_port]>;tag=[pid][call_number]
To: "bob" <sip:bob@[remote_ip]:[remote_port]>
Call-ID: [call_id]
CSeq: 1 INVITE
Contact: sip:alice@[local_ip]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Type: application/sdp
Content-Length: [len]
v=0
o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]
s=-
c=IN IP[media_ip_type] [media_ip]
t=0 0
m=audio [media_port] RTP/AVP 0
a=rtpmap:0 PCMU/8000
]]>
</send>
<recv response="407" auth="true" >
</recv>
<send>
<![CDATA[
ACK sip:bob@[remote_ip]:[remote_port] SIP/2.0
[last_Via:]
[last_From:]
[last_To:]
Call-ID: [call_id]
CSeq: 1 ACK
Contact: sip:alice@[local_ip]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Length: 0
]]>
</send>
<send retrans="500">
<![CDATA[
INVITE sip:bob@[remote_ip]:[remote_port] SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
From: "alice" <sip:alice@[local_ip]:[local_port]>;tag=[pid][call_number]
To: "bob" <sip:bob@[remote_ip]:[remote_port]
Call-ID: [call_id]
CSeq: 2 INVITE
[authentication username=alice password=alice]
Contact: sip:alice@[local_ip]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Type: application/sdp
Content-Length: [len]
v=0
o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]
s=-
c=IN IP[media_ip_type] [media_ip]
t=0 0
m=audio [media_port] RTP/AVP 0
a=rtpmap:0 PCMU/8000
]]>
</send>
<!-- By adding rrs="true" (Record Route Sets), the route sets -->
<!-- are saved and used for following messages sent. Useful to test -->
<!-- against stateful SIP proxies/B2BUAs. -->
<recv response="100" optional="true">
</recv>
<recv response="180" optional="true">
</recv>
<recv response="200" crlf="true">
</recv>
<!-- Packet lost can be simulated in any send/recv message by -->
<!-- by adding the 'lost = "10"'. Value can be [1-100] percent. -->
<send>
<![CDATA[
ACK sip:bob@[remote_ip]:[remote_port] SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
From: "alice" <sip:alice@[local_ip]:[local_port]>;tag=[pid][call_number]
To: bob<sip:bob@[remote_ip]:[remote_port]>[peer_tag_param]
Call-ID: [call_id]
CSeq: 2 ACK
Contact: sip:alice@[local_ip]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Length: 0
]]>
</send>
and i am running the script with below command :
C:\Program Files\Sipp_3.1>sipp -rsa 10.50.26.207:5060 -sf register_invite.xml 10
50.26.207:49152 -p 5062 -m 1
Regards,
Manaswini
This message is sent from LiveGO.com
------------------------------------------------------------------------------ Why Cloud-Based Security and Archiving Make Sense Osterman Research conducted this study that outlines how and why cloud computing security and archiving is rapidly being adopted across the IT space for its ease of implementation, lower cost, and increased reliability. Learn more. http://www.accelacomm.com/jaw/sfnl/114/51425301/
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
