This is the same issue as Steve Edwards had in recent posts here. Your problem is that the initial outgoing registration causes SIPP to allocate a call_id to the 'call'. The incoming INVITE will have a different call_id (allocated by the far end of the call) and so will not be recognised as part of this 'call' by SIPP and so you'll get an error about receiving a message for an unknown call id.
The solutions are discussed in the previous thread: Re: [Sipp-users] Registration for a server. Matt ________________________________________ From: raojlist [raojl...@163.com] Sent: Wednesday, 7 March 2012 3:21 p.m. To: sipp-users Subject: [Sipp-users] Hello all, I want to batch register agents , and then hold incoming call, but have problem. Hello all, I can register into asterisk successful,but can not hold incoming call from other agent client registered by eyebeam, my sipp xml config file describes. following: <?xml version="1.0" encoding="us-ascii"?> <scenario name="New_Call"> <send retrans="500"> <![CDATA[ REGISTER sip:[field0]@[remote_ip]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch] From: "[field0]" <sip:[field0]@[local_ip]:[local_port]>;tag=[call_number] To: "[field0]" <sip:[field0]@[remote_ip]:[remote_port]> Call-ID: [call_id] CSeq: 1 REGISTER Contact: sip:[field0]@[local_ip]:[local_port] Max-Forwards: 70 Subject: Performance Test Expires:3600 Content-Length: 0 ]]> </send> <recv response="100" optional="true" /> <recv response="200" crlf="true" /> <send> <![CDATA[ SIP/2.0 200 OK [last_Via:] [last_From:] [last_To:] [last_Call-ID:] [last_CSeq:] Contact: <sip:[local_ip]:[local_port];transport=[transport]> Content-Length: 0 ]]> </send> <recv request="INVITE" crlf="true" /> <send> <![CDATA[ SIP/2.0 200 OK [last_Via:] [last_From:] [last_To:];tag=[call_number] [last_Call-ID:] [last_CSeq:] Contact: <sip:[local_ip]:[local_port];transport=[transport]> Content-Type: application/sdp Content-Length: [len] v=0 o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip] s=- c=IN IP[media_ip_type] [media_ip] t=0 0 m=audio [media_port] RTP/AVP 0 a=rtpmap:0 PCMU/8000]]> </send> <recv request="ACK" crlf="true" /> <pause milliseconds="13000" /> <send retrans="500"> <![CDATA[ BYE sip:[service]@[remote_ip]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch] From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[call_number] To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param] Call-ID: [call_id] CSeq: 2 BYE Contact: sip:sipp@[local_ip]:[local_port] Max-Forwards: 70 Subject: Performance Test Content-Length: 0 ]]> </send> <label id="1" /> <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200" /> <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000" /> </scenario> ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
