Sorry forgot to mention that I am seeing rtp for only 508 'concurrent' calls Tried with -trace_err and -trace_calldebug flags but didn't see any log entries. When I am doing a capture I see rtp for only concurrent 508 calls and rest of the concurrent calls don't have rtp.
Regards, Vijay. -----Original Message----- From: robertk...@gmail.com [mailto:robertk...@gmail.com] On Behalf Of Rob Day Sent: Tuesday, January 28, 2014 5:54 PM To: Vijay Goje Cc: sipp-users@lists.sourceforge.net Subject: Re: rtp for only 508 calls I'm not aware of any built-in limit. If you run with "-trace_err" and "-trace_calldebug", do those logs have any more information on what happens after 508 calls? Best, Rob On 28 January 2014 22:46, Vijay Goje <vg...@ctigroup.com> wrote: > Hi Rob, > > > > I am using SIPp v3.4-beta2 with rtp stream. > > When I am running calls more than 508 say 600 calls I am seeing rtp > for only > 508 calls and not seeing rtp for the rest of the calls. > > > > I did set the ulimit to more than 1024 as shown below > > Ulimit -n 99999 > > But when running the sipp I see the following > > > > Warning: open file limit > FD_SETSIZE; limiting max. # of open files > to FD_SETSIZE = 1024 > > > > Is there any limit in sipp that's causing the rtp limited to 508 calls? > > > > Regards, > > Vijay. ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
