Hi Cheng,
Hi Cheng,
I had a typo in my previous command, but still RTP packets are sent to lo
interface.
I tried all three following commands with the same results:
./sipp -sn uac_pcap 192.168.1.236 -i 192.168.1.237
./sipp -sf uac_pcap.xml uac 192.168.1.236 -i 192.168.1.237
./sipp -sf uac_pcap.xml uac 192.168.1.236 -mi 192.168.1.237
Thanks!
Sherry
From: 程琨 [mailto:chengku...@gmail.com]
Sent: Sunday, September 28, 2014 8:09 PM
To: sipp-users@lists.sourceforge.net
Subject: [Sipp-users] problem solved due to ip address bound error
I solved the problem to my previous post "cannot capture rtp stream"
sipp seems prone to bind the lo address than eth0's address, so -i eth0_address
is recommended.
And Sherry Wei please respond to me, I probably know the solution to your post
but I cannot reply your post because I subscribe later than you.
------------------------------------------------------------------------------
Slashdot TV. Videos for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
