And did you got no reply from uas? Check the packets using tcpdump or
wireshark, on uac side, I'm pretty sure you could only send INVITE.
顺祝学习、工作顺利!
程琨
2014-09-29 14:21 GMT+08:00 程琨 <chengku...@gmail.com>:
> Well I know this issue. It seems that you tried too many times, pause for
> a while and try again.
> Or, use sudo.
>
> See if it helps.
>
>
> 顺祝学习、工作顺利!
>
>
> 程琨
>
> 2014-09-29 12:16 GMT+08:00 Sherry Wei <s...@carmelosystems.com>:
>
>> Hi Cheng,
>>
>>
>>
>> Hi Cheng,
>>
>>
>>
>> I had a typo in my previous command, but still RTP packets are sent to lo
>> interface.
>>
>>
>>
>> I tried all three following commands with the same results:
>>
>>
>>
>> ./sipp -sn uac_pcap 192.168.1.236 -i 192.168.1.237
>>
>>
>>
>> ./sipp -sf uac_pcap.xml uac 192.168.1.236 -i 192.168.1.237
>>
>>
>>
>> ./sipp -sf uac_pcap.xml uac 192.168.1.236 -mi 192.168.1.237
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Thanks!
>>
>> Sherry
>>
>>
>>
>> *From:* 程琨 [mailto:chengku...@gmail.com]
>> *Sent:* Sunday, September 28, 2014 8:09 PM
>> *To:* sipp-users@lists.sourceforge.net
>> *Subject:* [Sipp-users] problem solved due to ip address bound error
>>
>>
>>
>>
>> I solved the problem to my previous post "cannot capture rtp stream"
>>
>> sipp seems prone to bind the lo address than eth0's address, so -i
>> eth0_address is recommended.
>>
>> And Sherry Wei please respond to me, I probably know the solution to
>> your post but I cannot reply your post because I subscribe later than you.
>>
>
>
------------------------------------------------------------------------------
Slashdot TV. Videos for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users