> On Wed, 2008-09-17 at 22:07 -0400, M. Ranganathan wrote: > > I downloaded the unstable RPMs and installed them on my > machine so I > > would be sure the following is not a build related problem. I am > > having trouble routing calls to LG 6812 and Snom 320 > phones. Snom 320 > > uses a TCP connection. When inbound INVITE goes to SNOM 320 It does > > not respond. However the phone is registered and able to > make outbound > > calls. In the case of Nortel LG 1620, inbound calls are > made using udp > > transport ( the phone does not accept TCP ). The call is > rejected with > > "Not Acceptable Here" although the codecs offered ( PCMU/A/729) are > > all supported and configured to be supported by the phones in > > question. After the call fails, I get voice mail. > > Can you check that the SDP as received by the UAS is > identical to the SDP as sent by the UAC? It should be, and > if so, it mostly eliminates sipX as a potential cause. >
The f/w that Ranga used was very old and may have had problems with fragmented UDP packets. The phone is being upgraded right now which will hopefully clear the problem. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
