On Thu, 2008-09-18 at 10:29 -0400, Joly, Robert (CAR:9D30) wrote: > The sipXecs NAT Traversal feature is enabled and is configured with the > public IP address of the SBC as its 'public address' as it should.
I don't see why NAT Traversal is enabled. The *purpose* of the SBC is to adjust all the SIP signaling so that sipX sees everything on the far side of the SBC as if it were on the local network. Hence, if the SBC sends an INVITE to the gateway's address, the SBC will take care of all the signaling work, and sipX can act as if the gateway was on a local network. Dale _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
