I have just checked (r13757-13758) in changes that replace the
sipx_reset_cd script with two new scripts (descriptions follow).
Please read all of this, as there are things here that you need
to know:
sipx-setup
Configures the sipXecs-specific settings needed to make the
system managable with sipXconfig. This script is intended to
be used on a system that already has all the normal
configuration complete (hostname, dns, ntp, etc).
Developer Note:
This should be all you need to set up a system built from
source, and does not require that it be run as root
(running as the SIPXPBXUSER works).
The script prompts the user to ask whether this system is the
first sipXecs system or if this system is a new server being
added to an existing cluster.
First System:
Prompts for the SIP Domain.
Generates Certificates (CA & Host) using fixed
organization name inputs & SIP Domain
Generates a minimal domain-config file
Enables sipXconfig so that sipXsupervisor will start it.
Adding a server to an existing cluster:
Prompts for:
Master host name
A setup password
Fetches a setup tar file from master using basic auth w/
https and untars it.
NOTE:
Fetching the setup file is not yet supported by
sipXconfig (XCF-2615), so setting up a new distributed
system will be a pain for a little while. I am checking
this in anyway, because it will make testing the
sipXconfig side easier.
If you are running as root, it then configures sipXecs to be
started by default and offers to start the services
immediatly, otherwise it displays the command you should use
to start sipXecs.
sipx-setup-system
This replaces sipx_reset_cd - it initializes the system
services required by sipXecs, and then runs sipx-setup.
This script must be run as root to actually do anything, since
nearly everything it is supposed to do requires root
privileges, but it can be run by anyone - run this way it
doesn't actually do much except log what it would have done
into its log file:
.../var/log/sipxpbx/sipx-setup-system.log
Prompts for and sets:
Root password
Hostname
eth0 IP address/mask, gateway, dns servers
Attempts to start the network.
NOTE:
The current version does _not_ configure and start a local
DNS server. The plan is to add the capability to manage a
local DNS server into sipXconfig, so this script just sets
/etc/resolv.conf to the external servers. This may need to
be revisited as we refine our ideas on managing DNS from
sipXconfig (it's a bit of a chicken-and-egg problem).
Set up NTP using fixed values:
Timezone is set to Americas/New_York
NTP servers are set to {0,1,2}.us.pool.ntp.org
It then attempts to set the time using NTP; if that fails,
the time is set to midnight January 1st 2008. Since
sipXconfig now displays the time and provides ways for the
administrator to change it, starting the clock in the past
is ok.
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
