Robert, is that work going to happen before the 4.0 release? Thanks, Mike
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert Joly Sent: Monday, March 02, 2009 9:04 AM To: Matt White; [email protected] Subject: Re: [sipX-dev] Remote Worker setup > > I got the phone to work well but the registration still shows > "x-sipX-nonat", however, I suspect that is becuase on the > phone config I have the "NAT" option turned on and filled in > the phones external ip address. I will change it back and > confirm that the registration updated properly. The phone is > a Cisco 7960. That is surely the cause. > > > The problem was that in "NAT Traversal" under External > Address I had the internal ip address. > > > Once I changed this to the External NATTED ip, it worked. > The wording for this setting is confusing because it says > > "The ITSP facing address. This is the NATed public address. > If you have only one interface on your machine it will be the > same as your local address." I agree that this is 100% mileading. We have work planned to dramatically simplify and clean-up the configuration for NAT traversal. 8< _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
