So, is the Audiocodes seeing conference bridges as broken connections? How it defines and detect a broken connection?
- MM On Tue, Apr 14, 2009 at 10:52 AM, Alfred Campbell <[email protected]> wrote: > Folks, > > I was trying to use a freeSwitch conference bridge in the office which > is setup to use our Audiocodes PRI gateway. In doing this the systems > was dropping participants in the bridge at random and eventually causing > the bridges to drop. Thanks to Woof we looked into this and found out > that the following settings need to be changed in the Audiocodes > Gateway: > Setting > Disconnect on Broken Connection - Yes > Broken Connection Timeout [100 msec] - 100 (10 seconds) > > So to make this work I simply changed Disconnect on Broken Connection to > No. > > No question I think we need to change our gateway model in sipXconfig to > be able to configure this parameter. (it currently is not able to) > > The parameters and values are: > DisconnectOnBrokenConnection - 0 (No), 1 (Yes) > BrokenConnectionEventTimeout - 1-1000 > > These should be put into the [advanced_general] section of ini file that > is generated. > > Anyone see anything wrong with this approach? If not I will put a JIRA > in later today. > > Al > > > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
