I don't have another 4.0 box laying around to test with but I'm almost positive it would only reboot the phone you sent a profile to. Now it reboots every phone that has that line associated, even though there isn't a change to be made on some of them.
E.g., The boss' phone at the office has 0155 and 1155 assigned. His house phone only has 0155 but needs 3584. If I select the house phone, add 3584, hit apply, then send the profile it will reboot both office and home phone even though there are no changes made to the office phone. -----Original Message----- From: [email protected] on behalf of Alfred Campbell Sent: Wed 6/24/2009 9:52 AM To: Matt Keys; [email protected] Subject: Re: [sipX-dev] "send profiles" behavior differences in 4.0.1 From: [email protected] [mailto:[email protected]] On Behalf Of Matt Keys Sent: Wednesday, June 24, 2009 9:50 AM To: [email protected] Subject: [sipX-dev] "send profiles" behavior differences in 4.0.1 Prior to upgrading to 4.0.1 if I had two phones with the same line registered and I only wanted to reboot one of them it would do so. Now if I make a change to one phone and hit send profiles it reboots both phones. Is this the expected behavior? Always has worked the way you described on 4.0.1 for me. I was never aware you could selectively reboot sets with the same user assigned.
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
