Hi all, I use 4.0.2 stable installed from iso.
I found that "Diagnostics->Statistics->percentage disk usage" page only monitors /root file system. But after installation from iso hard disk is partitioned as follows: [r...@sipx ~]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda2 6092388 1127132 4650784 20% / /dev/sda5 126456032 1564688 118364140 2% /var /dev/sda1 124427 11244 106759 10% /boot tmpfs 517516 0 517516 0% /dev/shm All actual data is stored in /var partition, I mean logs, backups, voicemail, prompts, etc: It is /var, which must be monitored first of all: But I believe that all partitions (/root, /var, /boot) must be monitored:. I think it is not too complicated to make appropriate mrtg config for that: Should I file an issue for this? Is there a workaround? I mean is there a way to configure sipxmrtg manually, so that it'll monitor all partitions? Thanks and regards, Nikolay.
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
