http://track.sipfoundry.org/browse/XX-5271
There is an old patch attached which would monitor / and /var (on some
systems they are the same partition, and then the patch does not work).
Carolyn
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Nikolay
Kondratyev
Sent: Monday, September 28, 2009 12:37 PM
To: 'sipX developers'
Subject: [sipX-dev] 4.0.2 statistics: disk usage monitoring
Hi all,
I use 4.0.2 stable installed from iso.
I found that "Diagnostics->Statistics->percentage disk usage"
page only monitors /root file system.
But after installation from iso hard disk is partitioned as
follows:
[r...@sipx ~]# df -k
Filesystem 1K-blocks Used Available Use% Mounted
on
/dev/sda2 6092388 1127132 4650784 20% /
/dev/sda5 126456032 1564688 118364140 2% /var
/dev/sda1 124427 11244 106759 10% /boot
tmpfs 517516 0 517516 0% /dev/shm
All actual data is stored in /var partition, I mean logs,
backups, voicemail, prompts, etc...
It is /var, which must be monitored first of all...
But I believe that all partitions (/root, /var, /boot) must be
monitored.... I think it is not too complicated to make appropriate mrtg
config for that...
Should I file an issue for this?
Is there a workaround? I mean is there a way to configure
sipxmrtg manually, so that it'll monitor all partitions?
Thanks and regards,
Nikolay.
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
