Baslingappa Bhujang wrote: Hi All, * Add a Audio codes Mediant 1000 gateway in the config UI * Navigate to PSTN lines tab and add a PSTN line * Navigate to E1/T1 tab and change "Line Build Out Loss" to -15db.Click on Apply button * Navigate to RTP/RTPC tab and change Country variant to 71.Click on Apply button. * Send profiles to the gateway and restart the required services. * Down load the ini file from the config UI and upload to the Mediant 1000 Gateway. * Navigate to Configuration->PSTN Settings->Trunk Settings Here "Line Build Out Loss" parameter still shows as 0db only it should have changed to -15 db. Could some one please advice me whether I am following the right steps to change the "Line Build Out Loss" parameter. OR should I raise a Jira for the same. Country Variant Parameter is not reflected any where in the Web UI of the gateway but it is seen in the MACID.ini file.Could some one guide me where the parameter can be seen in the Web UI of the gateway. Thanks, Basling. It looks like this isn't working properly because sipXconfig generates an INI setting "LineBuildOutLoss" but the Mediant1000 expects "LineBuildOut.Loss", so there's a missing period in the sipXconfig generated file. Should create a jira issue on that. The Country Variant is defined as an Advanced setting under the RTP/RTPC group heading in sipXconfig. Dave.
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
