Hi,
Using sipXecs 4.2.1 (rev 018994) tandem call over the ITSP trunk fails.
When I use the Auto-Attendant to transfer the call back out over an ITSP trunk
(using les.net) the outgoing trunk call fails.
>From the logs I can see that the outgoing trunk call has the CLID of the
>incoming trunk call rather than the CLID specified for the ITSP trunk.
For the ITSP trunk I have tried:
Caller ID
Default Caller ID = 12345678 (ITSP account CLID)
Ignore user Caller ID = Y
Specify Caller ID = N
and:
Caller ID
Ignore user Caller ID = Y
Specify Caller ID = Y
Caller ID = 12345678 (ITSP account CLID)
Display name = Test
but they both give the same results (not sure why there's two ways of
overriding the CLID, that seems a bit redundant).
Call scenerio:
- Incoming call on ITSP trunk sent to 100, answered by Auto-Attendant
- Dial 2 to transfer to *81
- Hear authorization tone, dial auth code, hear ack tone, dial outgoing ITSP
trunk call
- Outgoing trunk call fails due to invalid CLID (used incoming CLID instead of
ITSP account CLID).
Is there an existing jira on this, or should I raise one?
Dave.
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
