Thanks for your help, Dale. But now I have another issue that I
haven't seen before:
------------------------------------------------------
[TEST]:SipSrvLookupTest::lookup
SipSrvLookup::servers("test2", "sip", OsSocket::UNKNOWN, -1) returns:
[END]
Failed test seq. no. 2, named 'test2'
Expected results were:
1.2.1.0:5060,0,1000.000,0,UDP
1.2.1.0:5060,0,1000.000,0,TCP
Actual results were:
SipSrvLookup::servers("test2", "sip", OsSocket::UNKNOWN, 102) returns:
[END]
Failed test seq. no. 3, named 'test2'
Expected results were:
1.2.1.0:102,0,1000.000,0,UDP
1.2.1.0:102,0,1000.000,0,TCP
Actual results were:
...
[ALL 97 test look similar - the actual results are simply blank]
------------------------------------------------
I've tried my BIND that's running on server and lookups work fine.
Should I not do "sudo make build"? I've been doing that because when I
do "make build" I get permission issues.
And I'm building on RHEL 5.4 and the subversion version is 19008.
Also, I'm seeing alot of "skipping incompatible [library]" as well,
but from my research this shouldn't be an issue, or is it?
Any help in either area would be much appreciated! Thank you!
On Tue, Jul 20, 2010 at 10:06 PM, WORLEY, Dale R (Dale)
<[email protected]> wrote:
> ________________________________________
> From: [email protected]
> [[email protected]] On Behalf Of W. E. W. Russell
> [[email protected]]
>
> -------------------------------------------
> [everything before this is successful]...
> Running org.sipfoundry.sipxconfig.phone.snom.SnomTest
> Tests run: 8, Failures: 0, Errors: 0, Time elapsed: 2.072 sec
>
> failure-report:
>
> init:
>
> check.src.present:
>
> style.check:
> Running Checkstyle 4.1 on 0 files
>
> style:
>
> BUILD SUCCESSFUL
> Total time: 3 seconds
> make[5]: Leaving directory
> `/home/sipx/sipx/incBUILD/sipXconfig/plugins/snom'
> make[5]: Entering directory `/home/sipx/sipx/incBUILD/sipXconfig/plugins'
> make[5]: Nothing to be done for `check-am'.
> make[5]: Leaving directory `/home/sipx/sipx/incBUILD/sipXconfig/plugins'
> make[4]: Leaving directory `/home/sipx/sipx/incBUILD/sipXconfig/plugins'
> make[3]: *** [check-recursive] Error 1
> make[3]: Leaving directory `/home/sipx/sipx/incBUILD/sipXconfig'
> make[2]: *** [check] Error 2
> make[2]: Leaving directory `/home/sipx/sipx/incBUILD/sipXconfig'
> make[1]: *** [recurse] Error 1
> make[1]: Leaving directory `/home/sipx/sipx/incBUILD'
> make: *** [build] Error 2
> _______________________________________________
>
> You're going to have to work your way back through the make output until you
> find the error. Unfortunately, in that part of the build, it does not stop
> promptly when an error happens.
>
> It would also help if you specified exactly which code version or Subversion
> revision you are building, and exactly what platform your are building on.
>
> Dale
>
--
William Eugene Ward Russell
incNETWORKS, Inc.
198 Brighton Avenue
Long Branch NJ 07740
Member of Technical Staff (System Integration)
Cell Phone # 732-744-6483
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
