I'm not sure on the details of that. Does it give the phone some credentials for registering? These phones will not do outgoing calls without a registration, they just show "cannot select outgoing line" if you try dialling.
Am 27.10.2010 09:25, schrieb Todd Hodgen: > There is a self discovery mechanism used on Polycom and Nortel Phones. It > uses CDP, and gives the phone a unique number when it is discovered. You > might want to consider incorporating that, which means the phone comes up > and can call, prior to a line being configured. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of David Becker > Sent: Wednesday, October 27, 2010 12:22 AM > To: [email protected] > Subject: Re: [sipx-dev] Siemens OpenStage Provisioning Current Status > > Am 26.10.2010 14:36, schrieb George Niculae: >> On Tue, Oct 26, 2010 at 2:20 PM, David Becker >> <[email protected]> wrote: >>> I wasn't able to reproduce that. >> I hit an exception when trying to send profiles to an openstage phone >> with no lines attached (it failed with NPE trying to retrieve speed >> dials). After adding lines I hit the problem mentioned above. Are >> there any other configurations you have in place for your phones? > Ah, I assumed you'd always have a line assigned to a phone before > writing its configuration. Is there a need to handle a phone without > lines properly? > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
