With these phones it probably wouldn't make sense to give them any sort
of provisioning data before they're fully configured in SipXconfig. They
will still report their existence to the server because the provisioning
isn't done through a simple download but a servlet, that servlet could
add them to the list of known phones (or something else can take the
sevlet's stored contact information
(/var/sipxdata/configserver/phone/profile/dls/{MAC}.contact) and report
those phones to SipXconfig). I'm not planning to implement that in order
to keep my schedule but it remains a possibility if I end up having more
time than I need.
Am 27.10.2010 10:45, schrieb Tony Graziano:
It is explained in better detail on the wiki:
http://wiki.sipfoundry.org/display/xecsuserV4r2/Configuring+Polycom+SoundPoint+IP+Phones
Connect phone to network and allow sipXecs auto provisioning to
generate temporary ID
To add a phone:
* Plug the device into your sipXecs network
* Wait for phone to download firmware and bootrom. This process is
outlined in First Time Phone Boot Process
<http://wiki.sipfoundry.org/display/xecsuserV4r2/Configuring+Polycom+SoundPoint+IP+Phones#ConfiguringPolycomSoundPointIPPhones-FirstTimePhoneBootProcess>
* Once the phone has completed booting, sipXecs will assign a
temporary ID to the phones. This is a 3 character alphanumeric
ID that will be something like *F78*.
* Remember this ID as you will need it to fully provision the phone
Add Line(s) To Phone
Now that you have auto-provisioned a phone you need to add at least
one line so the phone can register to the sipXecs server.
* Browse to *Devices -> Phones* and then select *unassigned* in
the /*Filter By...*/ drop down list
* Click the *serial number* of the phone that was just
auto-provisioned. The *Description* column contains the
temporary ID for easy searching. Note that there is no line
currently assigned to the phone:
On Wed, Oct 27, 2010 at 3:57 AM, David Becker
<[email protected] <mailto:[email protected]>> wrote:
I'm not sure on the details of that. Does it give the phone some
credentials for registering? These phones will not do outgoing calls
without a registration, they just show "cannot select outgoing
line" if
you try dialling.
Am 27.10.2010 09:25, schrieb Todd Hodgen:
> There is a self discovery mechanism used on Polycom and Nortel
Phones. It
> uses CDP, and gives the phone a unique number when it is
discovered. You
> might want to consider incorporating that, which means the phone
comes up
> and can call, prior to a line being configured.
>
> -----Original Message-----
> From: [email protected]
<mailto:[email protected]>
> [mailto:[email protected]
<mailto:[email protected]>] On Behalf Of David
Becker
> Sent: Wednesday, October 27, 2010 12:22 AM
> To: [email protected]
<mailto:[email protected]>
> Subject: Re: [sipx-dev] Siemens OpenStage Provisioning Current
Status
>
> Am 26.10.2010 14:36, schrieb George Niculae:
>> On Tue, Oct 26, 2010 at 2:20 PM, David Becker
>> <[email protected]
<mailto:[email protected]>> wrote:
>>> I wasn't able to reproduce that.
>> I hit an exception when trying to send profiles to an openstage
phone
>> with no lines attached (it failed with NPE trying to retrieve speed
>> dials). After adding lines I hit the problem mentioned above. Are
>> there any other configurations you have in place for your phones?
> Ah, I assumed you'd always have a line assigned to a phone before
> writing its configuration. Is there a need to handle a phone without
> lines properly?
> _______________________________________________
> sipx-dev mailing list
> [email protected] <mailto:[email protected]>
> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>
> _______________________________________________
> sipx-dev mailing list
> [email protected] <mailto:[email protected]>
> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected] <mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
<mailto:[email protected]>
Fax: 434.326.5325
Email: [email protected] <mailto:[email protected]>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
<mailto:[email protected]>
Helpdesk Contract Customers:
http://support.myitdepartment.net
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
