If you set caller-id for user and dials 101 then following prompt
will heard "You call is answered by ACS,Please Enter the extension"
instead of "You call is answered by ACS,Please Enter your
PIN".....Please this scenario if possible...
Regards,
Kumaran T
On 9/12/2012 5:38 PM, Tony Graziano wrote:
I'm confused. Called ID should have nothing to do with it. It would be
looking at the registered line the call is coming from.
i.e. - Why are we trying to fix valid behavior? If I understand
properly...
I'm subscriber 200. I set my callerid to "201" and call VM at "101".
When I call VM it should see I my registered line as 200 and ask me
for my pin (as user 200).
What is it I don't understand?
On Wed, Sep 12, 2012 at 7:54 AM, Kumaran
<[email protected]
<mailto:[email protected]>> wrote:
On 9/12/2012 5:23 PM, George Niculae wrote:
> On Wed, Sep 12, 2012 at 1:45 PM, Kumaran
> <[email protected]
<mailto:[email protected]>> wrote:
>> On 9/12/2012 2:51 PM, Kumaran wrote:
>>> On 9/12/2012 2:38 PM, George Niculae wrote:
>>>> On Wed, Sep 12, 2012 at 12:04 PM, Kumaran
>>>> <[email protected]
<mailto:[email protected]>> wrote:
>>>>> Hi All,
>>>>> If I set caller-id to user then call to 101 will play
the prompt
>>>>> "You call is answered by ACS,Please Enter the extension" to that
>>>>> particular user....This behavior is not seen(will play
normal prompt) if
>>>>> there is no caller-id is set...IMO its not a valid behavior
to play the
>>>>> prompt "You call is answered by ACS,Please Enter the
extension"....
>>>>>
>>>> I can see where to fix this, however please confirm first
that this is
>>>> a regression from 4.4
>>>>
>>>> George
>>>>
>>> Long back you had fixed the caller-id issue in 4.4 and I
closed it after
>>> checking it...Just now checked in latest 4.4(openuc build) for
confirming
>>> but caller-id doesn't work...But in 4.6 caller-id works in
both server but
>>> I'm seeing VM prompt issue...
>>>
>>> Regards,
>>> Kumaran T
>> You committed the fix for wrong VM prompt after setting user
caller-id in
>> 4.6 or I can raise issue in Jira? Also please check the
caller-id scenario
>> in 4.4 build if you have(in openuc doesn't work but don't have
sipxecs to
>> verify it)...If you need logs I can provide you...
>>
> Please post the jira tracker you're talking about
>
> George
OK George....What about 4.4(openuc) caller-id scenario?
Regards,
Kumaran T
_______________________________________________
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
