Andreas, I haven't say that it's not possible to reboot a phone, until it's registered. I just say that sipx is not able to reset the phone, when it is not registered. The thing is sipx sends NOTIFY with "check-sync", and it does not know where to send the message when the phone is not registered. Yes, sure, you can reboot and manage the phone through it's web interface, but if you need configuring the phone through sipx then the phone can only get new configuration during reboot. If the phone is configured to use dhcp address, then during reboot it'll get "tftp server name" via dhcp option 66, go to the specified tftp server and get configuration file. This worked for me with spa942. The phone must be configured to use dhcp. This is my understanding how it works. Nikolay.
> -----Original Message----- > From: Andreas Kaufmann [mailto:[EMAIL PROTECTED] > Sent: Friday, May 30, 2008 6:04 PM > To: Nikolay Kondratyev > Cc: [email protected] > Subject: Re: [sipx-users] Problems provisioning Linkys SPA962 > > Hi Nikolay, > > thanks for your answer. Of cause I can restart the phone manually, but > if it has no account data written into its configuration it won't > register anyway. So the main problem I have is that no configuration > data (SIP proxy, username/password) is written to the device. > > BTW, as far as I know it is possible to restart a Linksys phone by > calling a special URL (http://<phone-ip-addr>/admin/reboot), so > generally speaking it is not required for the phone to be registered to > restart it (if you know its IP address). > > Regards, > Andreas > > > Nikolay Kondratyev schrieb: > > Andreas, > > Sipx is not able to reset a phone until it is registered. > > So first time you need to reset the phone manually. > > After that, phone should get it's configuration and be working. > > Possibly you'd like to look at the network trace during this reboot. > It'll > > clarify how the phone gets it's configuration from sipx. > > HTH, > > Nikolay. > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:sipx-users- > >> [EMAIL PROTECTED] On Behalf Of Andreas Kaufmann > >> Sent: Wednesday, May 28, 2008 7:35 PM > >> To: [email protected] > >> Subject: [sipx-users] Problems provisioning Linkys SPA962 > >> > >> Hi, > >> > >> I have problems loading configuration into a Linkys SPA962. Service > >> Status says it has pushed the configuration data into the phone and > >> restarted the device, but when I look into the configuration of the > >> phone using the web browser nothing has changed, especially there is no > >> SIP account information. > >> > >> BTW, the phone is automatically discovered. Any ideas? > >> > >> Thanks, > >> Andreas > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users > >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > > > > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
