Hi Martin, I followed your suggestions and was able to install the system successfully. Thanks a lot!
Nakul On Fri, Jun 13, 2008 at 7:05 AM, Martin Steinmann <[EMAIL PROTECTED]> wrote: > Which version CD are you using? 3.10 CD should work fine, while the 3.11 > CD has some issues currently. > > If your VM is on a bridged network with the host, you most likely will not > want a DHCP server running in the VM as it might conflict with the one > running on your network. Select DNS and NTP but deselect DHCP. The > installation wizard should not fall out into a command prompt - that would > be a bug. > --martin > > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf of Nakul Deshpande > Sent: Fri 6/13/2008 12:42 AM > To: [email protected] > Subject: [sipx-users] how to configure ethernet on sipX > > Hi, > > I mounted the sipX installation CD on the virtual cd drive of my virtual > machine. The setup started. But then I ran into problems while doing > network > settings. I am on a private university network and hence I figured that > choosing DHCP will configure the network by itself. But then setup stopped > and i got a command prompt. > > Can anybody guide me on how i should configure the ethernet? > > Thanks, > Nakul > >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
