On Wed, 2008-06-18 at 08:52 -0400, Meller, Milosz wrote: > hi all, > > having a pretty funny issue here... i set up a DID that goes to a hunt > group last night. the hunt group rings 8 extensions at the same time, > then goes to a phantom user that's just a vm box. we discovered that > if a user calls the hunt group and hangs up before the hunt group runs > its course, the following occurs: > > (1) phones stop ringing for about 1 second. > (2) phones START RINGING AGAIN and do so for about 10 seconds > (3) all phones in hunt group reboot simultaneously > > i can't really do much research on this right now because the hunt > group is our support hotline and i can't have all our phones rebooting > several times a day, but i'll maybe do some work on it later. getting > a major kick out of this. > > the phones are polycom 650's with 3.0.2c firmware/4.1.0 bootrom. > audiocodes mediant 1000 gateway. sipx 3.8.1.
If you're going to use polycom 3.x, you're probably better off upgrading to sipXecs 3.10.x. Getting a message trace would be interesting (more so if it still happens after an upgrade). -- Scott Lawrence tel:+1.781.229.0533;ext=162 or sip:[EMAIL PROTECTED] sipXecs project coordinator - SIPfoundry http://www.sipfoundry.org/sipXecs CTO, Voice Solutions - Bluesocket Inc. http://www.bluesocket.com/ http://www.pingtel.com/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
