On Mon, 2008-11-10 at 13:13 -0600, James Brown wrote: > I recently uninstalled 3.11 and went back to 3.8 (via complete removal > of 3.11). Since the re install all calls to voice mail, auto > attendant, or inbound fail with a BYE coming from sipx just after the > call connects. > > Looking through the media server logs I notice this: > > "2008-11-10T12:06:03.147191Z":5:CP:WARNING:sipx.mydomain.com:CallManager-13:B54CEB90:mediaserver:"CpPhoneMediaInterface::CpPhoneMediaInterface > dropping codec type 260 as not supported" > "2008-11-10T12:06:03.147224Z":6:CP:WARNING:sipx.mydomain.com:CallManager-13:B54CEB90:mediaserver:"CpPhoneMediaInterface::CpPhoneMediaInterface > dropping codec type 259 as not supported" > > Could this be the culprit of my problems or am I way off base on this. > Any help would be greatly appreciated.
Take a look at etc/sipxpbx/mediaserver-config for: mediaserver.rtp.codecs VXIString EG711U EG711A pcmu pcma telephone-event that line might have been different in 3.8 and could be the source of your problem, but if it is you've probably got worse problems... What do you mean by "complete removal of 3.11" - removing an rpm does not normally remove the configuration files - if you've got config files that were touched by 3.11 and you're trying to run 3.8 with them you're in for a lot of debugging. Probably easier to wipe the machine to bare metal and start over. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
