Hi Michael,
I actually follow the tutorial (and verified SRV records resolved at
each end) and setup the two end-points.
Used the full domain in the gateway address field (also tried with IP
addresses, using domain name proved to be working v.s. IP)
What happens is, when i dial from site A and site B phone rings then
hangs up.
When i dial again from site A to B, B rings and I manage to answer.
After about 12 seconds it hangs up.
Ports 5060 and 5090 (both tcp+udp) are opened on site A and B's router.
Does this behavior ring any bells or a pattern?
Offtopic: I've had continuous freezing after i update 3.8 to 3.10.3 and
firmware 2.2.2 to 3.1.1 (rom 4.0 to 4.1.1, even tried 4.1.0).
I have tried the combinations that are suggested in the list but the
freezing is still happening.
As i suspected of a possible corruption in xml configuration, i've
exported the user+phones, deleted everything under TFTPROOT folder and
import back the user+phones and the Polycom 330 files and deployed the
configs after editing Phones under a single Phone Group (i.e. set the
date time to 24 hour and disable most of the Features as it doesnt apply
to 330).
Now i'm still running 3.10.3 and switched the firmware back to 2.2.2 and
ROM 4.0
What i suspect is, the polycom template files under
*/etc/sipxpbx/polycom/mac-address.d *now changed to 3.1.(1) config
XMLs. And if it did i don't know how to reverse it back to 2.0 XMLs.
Do you have any knowledge on this or how to verify and/or switch back to
correct XML templates (i am assuming these files under mac-address.d
updated with the Yum sipx 3.10.3 update...)
Any help would be greatly appreciated.
Cheers.
[email protected] wrote:
Send sipx-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://list.sipfoundry.org/mailman/listinfo/sipx-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of sipx-users digest..."
------------------------------------------------------------------------
Today's Topics:
1. Re: multi-site sipXecs deployment (Picher, Michael)
------------------------------------------------------------------------
Subject:
Re: [sipx-users] multi-site sipXecs deployment
From:
"Picher, Michael" <[email protected]>
Date:
Wed, 4 Feb 2009 12:01:44 -0500
To:
"Robert Joly" <[email protected]>, <[email protected]>
To:
"Robert Joly" <[email protected]>, <[email protected]>
http://sipx-wiki.calivia.com/index.php/HowTo_interconnect_two_sipX_PBXs
The big thing is to get the two dns domains so they can resolve each
other's addresses...
Mike
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of *Robert Joly
*Sent:* Wednesday, February 04, 2009 9:34 AM
*To:* [email protected]
*Subject:* [sipx-users] multi-site sipXecs deployment
Hi,
I have a two-site setup with a sipXecs at each site and I want to
connect the two sites together so that a user at a given site can call
a user at the other site. I was looking through the sipXecs wiki to
figure out the best practices for deploying such a configuration but
didn't find anything. If someone has a pointer to such information,
could you please send it to me?
Thank you.
bob
------------------------------------------------------------------------
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
