On Mon, Feb 9, 2009 at 12:48 PM, M. Ranganathan <[email protected]> wrote: > On Mon, Feb 9, 2009 at 12:41 PM, Arjun Sambamoorthy <[email protected]> > wrote: >> Ranga, >> >> Yes, I have defined an SBC role for the machine. May be I am >> encountering the same issue you guys are facing. >> >> Here is my ITSP information, >> >> 1) Provider - viatalk.com >> 2) Proxy - 216.246.105.146 >> 3) Domain - 216.246.105.146 ( chicago-1a.vtnoc.net ) >> 4) Use Public address for call setup - yes >> 5) Strip Private headers - yes >> >> If I am using the host name for the domain/proxy, the phone calls are >> not successful. There is a DNS resolving issue with viatalk, have to >> raise a ticket. >> The reason is, the host name gets resolved to 216.246.105.146 when it >> registers. But when I make a call it is getting resolved to something >> else and this server is not handling the calls properly. So, I have to >> stick with static IP address for time being. >> >> One more question, how to configure an incoming dial plan? When I make >> a call from the PSTN it hits the sipXbridge, but it is not getting >> forwarded to the phone. > > You can do this in one of two ways. > > 1. Leave out the "inbound calls desitnation" in the sipxbridg config > page (leave it blank) and set an alias coresponding to your DID on the > user account. > > 2. Set the "inbound calls destination" to the extension you want your > inbound calls routed to (i.e. an extension ) > > Let me know if it works (or not). > > Ranga
Another tip -- if you are behind a NAT and there is no voice for the inbound call, check to see your value for NAT keep alive method. Some ITSPs will not transmit until the see an inbound packet. Others expect you to configure a range of ports for NAT traversal in your firewall/NAT. You could try a few different values for RTP Keepalive -- "use last sent packet works" well in many such cases. If inbound SIP Signaling is an issue, you can also look at your sip keep alive packet and interval (however that may not be an issue because you report that signaling is actually being seen at sipxbridge). Ranga >> >> Thanks again, >> Arjun >> >> >> >> On Fri, Feb 6, 2009 at 4:38 PM, M. Ranganathan <[email protected]> wrote: >>> On Fri, Feb 6, 2009 at 5:30 PM, Arjun Sambamoorthy <[email protected]> >>> wrote: >>>> Ranga, >>>> >>>> Thanks a lot. I works perfectly, I can make calls via my ITSP. After >>>> configuring the SBC and Gateway settings, I had to start sipxbridge.sh >>>> script from the command line manually. How can I automate it? >>> >>> Arjun, >>> >>> The service should be started by sipxsupervisor. You should not need >>> to do this manually. Did you define an SBC role for the machine on >>> which you want to run sipxbridge? It is also possible that you have >>> encountered a known issue we are addressing at the moment. >>> >>> If you could, please send me information about your ITSP so that I can >>> add it to our wiki page. >>> >>> Thanks >>> >>> >>>> >>>> Thanks again >>>> Arjun >>>> >>>> On Fri, Feb 6, 2009 at 8:01 AM, M. Ranganathan <[email protected]> wrote: >>>>> On Thu, Feb 5, 2009 at 8:32 PM, Arjun Sambamoorthy <[email protected]> >>>>> wrote: >>>>>> After reading this link >>>>>> http://sipx-wiki.calivia.com/index.php/SipXbridge_Overview_and_Configuration >>>>>> from sipx wiki, I downloaded the sipX version 3.11.9.iso. >>>>>> sipXbridge based SBC is not getting listed in SBC options. It just >>>>>> lists Unmanaged SBC and internal SBC. But the link says 3.11 dev >>>>>> release has this support. >>>>>> >>>>>> Can someone tell me which version has this support? I want to >>>>>> configure sipX to register with my ITSP and place phone calls. >>>>> >>>>> Arjun, >>>>> >>>>> Yes the option is available. SipXbridge is indeed the internal SBC. >>>>> >>>>> Ranga >>>>> >>>>>> >>>>>> Any help is highly appreciated. >>>>>> >>>>>> Thanks >>>>>> -Arjun >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>>>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> M. Ranganathan >>>>> >>>> >>> >>> >>> >>> -- >>> M. Ranganathan >>> >> > > > > -- > M. Ranganathan > -- M. Ranganathan _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
